SciELO - Scientific Electronic Library Online

 
vol.24 issue4Caracterización de las propiedades ópticas de Betacianinas y Betaxantinas por espectroscopía Uv-Vis y barrido en ZObtención y caracterización de películas magnéticas de ferrita de Ni-Zn por depósito electroforético author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Superficies y vacío

Print version ISSN 1665-3521

Superf. vacío vol.24 n.4 Ciudad de México Dec. 2011

 

Resistencia a la corrosión de películas cerámicas delgadas

 

Carbajal-De la Torre G.*, Espinosa-Medina M. A., Pacheco-Ibarra J. J, Ibarra-Bracamontes L. A., Galván S. R. y Espitia Cabrera M. I.

 

Universidad Michoacana de San Nicolás de Hidalgo UMSNH, Facultad de Ingeniería Mecánica Santiago Tapia 403. Centro C.P. 58000. Morelia Michoacán México. *gcginacarbajal@gmail.com

Universidad Michoacana de San Nicolás de Hidalgo UMSNH, Facultad de Ingeniería Química Santiago Tapia 403. Centro C.P. 58000. Morelia, Michoacán México.

 

Recibido: 30 de noviembre de 2010
Aceptado: 20 de octubre de 2011

 

Resumen

En este trabajo se han propuesto la síntesis y la caracterización de películas cerámicas delgadas híbridas a base de polimetilmetacrilato (PMMA) con óxido de titanio (TiO2), y películas cerámicas a base de óxido de zirconio (ZrO2) resistentes a la corrosión. La síntesis de la fase inorgánica se llevó a cabo por el método solgel vía alcóxidos y polimerización de la fase orgánica vía radicales libre. De acuerdo a las metas, se obtuvo un recubrimiento transparente y continuo, que forma una barrera química y física contra el ambiente corrosivo. Para la caracterización de este recubrimiento y su evaluación se utilizaron técnicas Electroquímicas y Microscopía electrónica de barrido.

Palabras clave: Sol-gel; Película cerámica delgada; Corrosión; Oxidos metálicos; Polarización lineal.

 

Abstract

In this work has proposed the synthesis and characterization of hybrid ceramic thin films produced by the base of polymethilmetacrylate (PMMA) and zirconium oxide (ZrO2), and titanium oxide (TiO2) for applications to corrosion protection. The synthesis of the inorganic phase was carried out by the alcoxide solgel method and polymerization of the organic phase was made by free radicals. According to the goals, a transparent and continuous film was obtained, which improved a chemical and physics barrier against the corrosive environment. For the characterization of this thin film and their evaluation the electrochemical techniques and Scanning Electron Microscopy were used.

Keywords: Sol-gel; Ceramic thin film; Corrosion; Metallic oxides and lineal polarization.

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

Agradecimientos

Se agradece al CONACYT por el apoyo otorgado con el proyecto con referencia MOD-ORD-12-08 PCI-075-04-08.

 

Referencias

[1]. Maki, T. and Sakka, S., J. Non-Cryst. Solids 100, 303(1988).         [ Links ]

[2]. Lucuta, P.G., Haliday, J.D., and Christian, B., J. Mater. Sci.,27, 6053.(1992).         [ Links ]

[3]. Ikoma, H., Katayama, S., Sekine, M., and Nomiya, Y., Am. Ceram. Soc., Annual Meeting, Indianapolis, (1989).         [ Links ]

[4]. Yogo, T., Kodama, S., and Iwahara, H., J. Mater. Sci., 28, 105 (1993).         [ Links ]

[5]. Jones, D.A., Principles and Prevention of Corrosion, Ed.Maxwell-MacMillan, (N.Y. E.U. 1992).         [ Links ]

[6]. Schreir, L.L, Corrosion, Newness-Butterworths, vol.2,(1976)        [ Links ]

[7]. De Lima Neto P., Atik M., Avaca L.A., Aegerter M.A., Journal of Sol-Gel Sci. Tecnol., 2, 529 (1994).         [ Links ]

[8]. Fitzer, F., and Schlichting, J., High Temperature Corrosion,Editor: R. A. Rapp, March 2-6, 1 (San Diego California, NACE, Houston, Tx, 1981) p. 604.         [ Links ]

[9]. Ansari, A.A., Saunders, S.RJ., Bennett, M.J., Tuson, A.T., Ayres, C.F., and Steen, W.M. "Silicon rich ceramic coating for substitution of chromium in high temperature technology" I.V.Mitchell and H. Nobusch, Elsevier Applied Science (London,England 1988), p. 281.         [ Links ]

[10].Ansari, A.A., Saunders, S.RJ., Bennett, M.J., Tuson, A.T., Ayres, C.F., and Steen, W.M., 88, 135 (1987).         [ Links ]

[11].Mrochek, Zh.A., Eizner, B.A. and Ivanov, I.A., "A study ofprotective properties of ion-plasma silicides coatings" Corrosion/91 (Houston TX, NACE International, 1991), p. 452.         [ Links ]

[12].Sakka, S., Journal of Non-Crystalline Solids, 73, 651 (1985).         [ Links ]

[13].Dislich, H., and Hussmann, E., Thin Solids Films, 77, 129 (1981).         [ Links ]

[14].G. Mrówka-Nowotnik, J. Sieniawski, M. Wierzbiñska, Archives of Mater Sci. and Eng., 28, 69 (2007).         [ Links ]

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License