SciELO - Scientific Electronic Library Online

 
vol.29 issue2Effects of hydrogen dilution and B-doping on the density of Si-C bonds and properties of a-SixC1-x:H films author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Superficies y vacío

Print version ISSN 1665-3521

Abstract

PULZARA-MORA, A. et al. Structural, optical and morphological properties of InxGa1-xAs layers obtained by RF magnetron sputtering. Superf. vacío [online]. 2016, vol.29, n.2, pp.32-37.  Epub Oct 23, 2020. ISSN 1665-3521.

Indium gallium arsenide layers (InxGa1-xAs) were prepared on Silicon (100) and glass substrates in an argon atmosphere by R.F. magnetron sputtering. The growth temperature was 580 °C and high purity targets of gallium arsenide and indium were used. The effects due to the RF power for the In sputtering and the substrate type on the deposited films were studied by X-ray diffraction and Raman microscopy. These studies revealed the formation of InxGa1-xAs with the zinc-blende phase. The results also show that at low In sputtering RF power, there is a preferential growth along of (111) direction. Morphology and thickness of the layers were studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM), revealing a variation of particle size and roughness. Energy dispersive spectroscopy (EDS) allowed us to determine the atomic percentages of In, Ga, and As. These results are in agreement with Raman measurements, where GaAs-like and InAs-like LO and TO vibrational modes were observed with a shift attributed to the indium concentrations in the InxGa1-xAs layers. By secondary ion mass spectroscopy (SIMS), the interface quality was studied.

Keywords : RF magnetron sputtering; Semiconducting ternary alloys; InGaAs; SIMS.

        · text in English