SciELO - Scientific Electronic Library Online

 
vol.10 issue1Polymeric fiber reinforced concrete exposed to fireNumerical analysis of composite concrete and steel slabs section under fire situation author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista ALCONPAT

On-line version ISSN 2007-6835

Abstract

SALES, C. A. S. et al. Fire resistance of ceramic-masonry sealing blocks using intumescent paint protection. Rev. ALCONPAT [online]. 2020, vol.10, n.1, pp.53-68.  Epub May 16, 2022. ISSN 2007-6835.  https://doi.org/10.21041/ra.v10i1.417.

The efficiency of surface protection of sealing masonry structures with intumescent ink was evaluated in relation to mechanical resistance and thermal insulation. Sixty ceramic sealing masonry blocks were used. The temperature of the face directly exposed to the flame was on average 25% lower for the block with passive protection. The compressive strength of the blocks with passive protection was about 70% higher than the unprotected blocks, after 60 minutes of direct exposure to the flame. More than 70% of the blocks without passive protection and that were exposed to flame had compressive resistance of 1.35 MPa, while 100% of the blocks with protection had values 2.38 MPa, even after 60 minutes of exposure.

Keywords : masonry; fire; passive protection; intumescent paints; resistance.

        · abstract in Portuguese | Spanish     · text in English | Portuguese | Spanish     · English ( pdf ) | Spanish ( pdf ) | Portuguese ( pdf )