Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Similares en SciELO
Compartir
Journal of applied research and technology
versión On-line ISSN 2448-6736versión impresa ISSN 1665-6423
J. appl. res. technol vol.2 no.3 Ciudad de México dic. 2004
Digital blood pressure monitor
R. Fuentes & M. A. Bañuelos
Laboratorio de Electrónica, Centro de Ciencias Aplicadas y Desarrollo Tecnológico UNAM, Apdo. Postal 70 - 186, Coyoacán 04510, México, D. F. Email: fuentesr@aleph.cinstrum.unam.mx
Received: January 15th, 2003.
Accepted: May 5th, 2003.
Abstract
In this work we present a blood pressure monitor which measures both the high blood pressure (systolic pressure), and the low blood pressure (diastolic pressure). It is a semiautomatic meter because the inflation of the occlusive cuff is carried out in a manual way. The transducer used is a piezoresistive silicon pressure sensor integrated on chip which provides a proportional voltage to the input pressure, with a measurement range from 0 to 50 kPa (07.3 PSI). The oscillometric method is employed, which consists on detecting the oscillometric signal on brachial artery, being processed at each pressure step, when the cuff is gradually deflated. Signal sampling is carried out at a rate determined by the heart rate.
In order to program the digital electronics of the circuit we used Altera tools, with the compiler MAX-PLUS II, and the device selected to implement the design was an EPM7128SLC84-15 CPLD (Complex Programmable Logic Device).
Keywords: Blood pressure monitor, Altera applications, Biomedical instrumentation.
Resumen
El monitor digital de presión sanguínea disefado, que se presenta en este trabajo, mide tanto la presión sanguínea alta (presión sistólica), como la presión sanguínea baja (presión diastólica). Es un medidor semiautomático, es decir, el inflado de la faja de presión para el brazo se hace en forma manual. El transductor utilizado es un sensor de presión piezoresistivo integrado en forma de chip, cuya salida es un voltaje proporcional a la presión de entrada, con un intervalo de medición entre cero y 50 kPa (0-7.3 PSI). Para realizar la medición se utiliza el principio oscilométrico, que consiste en detectar la sefal oscilométrica sobre la arteria branquial, la cual es procesada para cada paso de presión, al tiempo que la faja de presión es desinflada en forma gradual. El muestreo de sefal se efectúa a un valor determinado por el valor del pulso cardiaco.
Para programar la electrónica digital del circuito se usó la plataforma Altera, con el compilador MAX-PLUS II, y el dispositivo que se utilizó para implantar el diseño fue un CPLD, EPM7128SLC84-15.
DESCARGAR ARTÍCULO EN FORMATO PDF
Reference
[1] Cromwell L. and Weibell F. J. Biomedical instrumentation and measurements, Prentice-Hall, Inc, 1980. [ Links ]
[2] Aston R. Principles of Biomedical Instrumentation and Measurement, Merrill Publishing Company, 1990. [ Links ]
[3] Motorola Inc. Pressure Sensor Device Data, 1993. [ Links ]
[4] Franco S. Design with operational amplifiers and analog integrated circuits, Mc Graw-Hill, 1988. [ Links ]
[5] Fabricius E. Modern digital design switching theory, CRC Press, Inc. U.S.A., 1992. [ Links ]
[6] Mano M. Digital Logic and computer Design, Prentice Hall, Inc. Mexico, 1987. [ Links ]
[7] Altera Corporation. MAX+PLUS II Graphic & Symbol Editors. San Jose, California,1997. [ Links ]
[8] Altera Corporation. MAX+PLUS II Compiler. San Jose, California,1997. [ Links ]
[9] Altera Corporation. MAX+PLUS II Simulator, Timing Analizer & Waveform Editor, 1997. [ Links ]
[10] Altera Corporation. MAX+PLUS II Text Editor & AHDL. San Jose, California,1997. [ Links ]