Servicios Personalizados
Revista
Articulo
Indicadores
Citado por SciELO
Accesos
Links relacionados
Similares en SciELO
Compartir
Journal of applied research and technology
versión On-line ISSN 2448-6736versión impresa ISSN 1665-6423
Resumen
SUJITH, R. et al. Experimental investigation and numerical validation of neuro fuzzy-based Cartesian robot for soft material cutting. J. appl. res. technol [online]. 2021, vol.19, n.5, pp.420-436. Epub 25-Mar-2022. ISSN 2448-6736. https://doi.org/10.22201/icat.24486736e.2021.19.5.1038.
Present technology used for soft material cutting robot are laser, water-jet, ultrasonic, plasma and oxy-gas cutting. The scope for designing and fabrication of soft material cutting robots are increasing due to its cost effectiveness and quality of cutting. Cartesian robots are mainly used in assembly and manufacturing applications. They also have a high degree of mechanical rigidity, accuracy, and repeatability. A previous work of more elementary kind was used as a skeleton model to start this work The purpose of the work is the maintenance and implementation of a 4 Degree of freedom robot and also to provide intelligence to the robot using fuzzy logic and neuro-fuzzy for soft material cutting. The kinematic modeling of robot manipulator is done using Denavit-Hartenberg (D-H) parameterization method and Euler-Lagrange method is used for dynamic analysis to determine actuator torque for each joint. The image is acquired with the help of the digital camera which is fixed in a suitable position so that it can scan the entire workspace. Prewitt edge detection algorithm was used for image processing and analysis. The signal for the cutting is interfaced through the Arduino Uno r3 controller.
Palabras llave : Cartesian robots; image processing; prewitt edge detection; neuro fuzzy.