SciELO - Scientific Electronic Library Online

 
vol.44 número2Tipos de pies en una Población Mexicana: Análisis de la Morfología de la Huella Plantar y Revisión de la LiteraturaViabilidad en el uso de la región UV-Visible para la caracterización de glucosa en agua desionizada mediante Arduino 1 índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista mexicana de ingeniería biomédica

versión On-line ISSN 2395-9126versión impresa ISSN 0188-9532

Resumen

RAMIREZ-REYES, José Luis et al. Electrochemical Studies of Magnesium Coated with Modified Chitosan and Electrosprayed as an Anticorrosive Protection Method in Bone Repair. Rev. mex. ing. bioméd [online]. 2023, vol.44, n.2, 1337.  Epub 04-Mar-2024. ISSN 2395-9126.  https://doi.org/10.17488/rmib.44.2.2.

Magnesium (Mg) is essential for the metabolic reactions of the human body and is known for its biocompatibility, its mechanical and physical properties are similar to human bone, which is why it is considered to have high potential in biomedical applications such as temporary and resorbable implants. Through surface modifications, the high tendency to corrosion of Mg could be controlled, such as biodegradable membranes that prevent the passage of chloride ions present in the human organism. To prepare the membrane, solutions of chitosan modified with gelatin and/or glutaraldehyde are used and by means of the electrospray method applied to protect the Mg. To simulate body fluid conditions a Kokubo saline solution (BFK) was prepared. The study focuses on evaluating the corrosion rate of Mg with a coating made of a chitosan electrosprayed membrane, applying electrochemical measurements of electrochemical impedance spectroscopy and linear polarization resistance.

The key additive to improve the behavior of the membranes was observed with the use of gelatin, where the membrane with the best results lowing corrosion rates is the Mg CH+GE+GL system, which it was observed with very good physical integrity in the images of morphological analyzes of the surface after 30 days of exposure.

Palabras llave : Bone Repair; chitosan modified; electrochemical techniques; electrosprayed coatings; magnesium.

        · resumen en Español     · texto en Inglés