SciELO - Scientific Electronic Library Online

 
vol.65 número4Deposit of AlN thin films by nitrogen reactive pulsed laser ablation using an Al targetSynthesis and crystal structure of the quaternary semiconductor Cu2NiGeS4, a new stannite-type compound índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista mexicana de física

versión impresa ISSN 0035-001X

Resumen

HASSAN, H.H. et al. Effect of foaming agent on the mechanical properties of sulfur and peroxide cured ethylene propylene diene monomer rubbers. Rev. mex. fis. [online]. 2019, vol.65, n.4, pp.351-354.  Epub 06-Mayo-2020. ISSN 0035-001X.  https://doi.org/10.31349/revmexfis.65.351.

Ethylene Propylene Diene Monomer rubbers loaded with different concentration of azodicarbonamide as a foaming agent using two different cross-linking systems were subjected to the mechanical, compression and swelling tests at room temperature (300°K). Samples vulcanized by peroxide reveal more advantage over those vulcanized by sulfur especially for the amount of specific gravity and the compression test. The tensile test shows a noticeable increase in the true stress and strain at break for the sulfur cross-linking system than the peroxide one. For the swelling test, the empirical equation used by Kumnuantip and Sombatsompop shows the best fitting for the degree of swelling - time data.

Palabras llave : EPDM Foam; mechanical properties; peroxide and sulfur vulcanizates; tensile resistance; Abrasion and swelling test; 42.70.Jk; 62.20.-x.

        · texto en Inglés     · Inglés ( pdf )