SciELO - Scientific Electronic Library Online

 
vol.22 número3Polimetamorfismo de muy bajo a bajo grado en rocas volcánicas jurásico-cretácicas al sur de Cholila, Chubut, Patagonia ArgentinaMarco geológico del pórfido de molibdeno El Crestón, Sonora central, México índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista mexicana de ciencias geológicas

versión On-line ISSN 2007-2902versión impresa ISSN 1026-8774

Resumen

LOZANO, Rufino  y  BERNAL, Juan Pablo. Characterization of a new set of eight geochemical reference materials for XRF major and trace element analysis. Rev. mex. cienc. geol [online]. 2005, vol.22, n.3, pp.329-344. ISSN 2007-2902.

Eight new geochemical reference materials for the analysis of major and trace elements in typical geological matrices have been prepared, and their physical and chemical homogeneity has been thoroughly assessed. The materials (IGL sample series) consist of a lateritic soil, a dolomite, a limestone, an andesite, three different syenites and a gabbro, all of them sampled at different localities from Mexico. The results indicate that the IGL samples are physically homogeneous down to a sub-batch of 0.2 g with a 0.05 significance level. Major and trace element provisional composition of these materials was obtained by wavelength-dispersive X-ray fluorescence spectrometry (WD-XRF). Statistical evaluation to verify for “sufficient homogeneity” was applied and sufficient chemical homogeneity at the 0.05 significance level was demonstrated. Calibration curves were constructed using the IGL samples in order to assess their performance as reference materials. Analyses of international reference materials (RGM-1, AGV-1, SDO-1, and Es-3) demonstrate the reliability of the IGL samples for calibration and intercalibration purposes. Provisional concentrations for 24 major and trace elements, as well as FeO and loss on ignition (LOI) values, are provided for all IGL reference materials.

Palabras llave : reference materials; WD-XRF; calibration; sufficient homogeneity; chemical analysis.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )