SciELO - Scientific Electronic Library Online

 
vol.48 número7Un nuevo índice de nitrógeno para evaluar la dinámica de nitrógeno en sistemas de producción de papa (Solanum tuberosum L.) en BoliviaAplicación de compost, a base de champiñón enriquecida con silicio, en trigo (Triticum spp.) índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Agrociencia

versión On-line ISSN 2521-9766versión impresa ISSN 1405-3195

Resumen

BARRALES-BRITO, Edgar et al. In vitro determination of CO2 emission in forest litter. Agrociencia [online]. 2014, vol.48, n.7, pp.679-690. ISSN 2521-9766.

Forest litter emits CO2 into the atmosphere, but there are few studies on the subject and it is important to generate this information to improve inventories of greenhouse gases (GHGs). Methods to quantify this emission are performed in situ during long periods of measurements and others require the use of high cost instruments; some measure the loss of organic matter over time and others are indirect and are based on measurements dependent on weather conditions. The aim of this study was to generate a standardized operation protocol (PEO, its Spanish acronym) to measure the CO2 emission potential of in vitro litter using a manometric respirometer (OxiTop OC110®) in a maximum time of 10 d incubation. Litter samples were collected in a Quercus spp forest in Tequexquinahuac, Estado de Mexico, at the beginning of 2012. The experimental design was completely randomized, treatments were incubations (25 °C) with four litter moisture percentages (20, 40, 60 and 80 % dry weight) and four sample sizes (5, 10, 20, 40 g), and each treatment was replicated three times. Based on the data ANOVA was performed and treatment means were compared with the Tukey test (p≤0.05). The response variables were: CO2 emission, CO2 emission rate and percentage of oxidized carbon compared to total carbon at the start of incubation. The optimum conditions for the measurement were 10 g sample and 60 % humidity. Under these conditions the maximum CO2 emission was recorded (23 554 mg CO2 kg-1) as well as the lowest standard deviation (331 mg CO2 kg-1), the lowest of the 16 treatments resulting from combining sample sizes and moisture percentage. In these conditions the percentage of carbon emitted compared to the initial carbon was the highest (5.26 %). The measurement of respiration in such assay depends on the humidity of the sample and the availability of oxygen present in the system, which is the condition for determining the optimal operating environment using the OxiTop OC. The data generated by OxiTop are indicators of the potential emission of CO2 by different types of litter and have a similar value to that of the incubations performed to evaluate the potential mineralization of nitrogen.

Palabras llave : Respirometry; CO2; OxiTop® (R); biogeochemistry; carbon; soil.

        · resumen en Español     · texto en Español

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons