Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Similares en SciELO
Compartir
Computación y Sistemas
versión On-line ISSN 2007-9737versión impresa ISSN 1405-5546
Resumen
CARRILLO-DELGADO, C. M. et al. Graphic User Interface for Modeling States of Polarization in Fiber Optics. Comp. y Sist. [online]. 2019, vol.23, n.1, pp.63-70. Epub 26-Feb-2021. ISSN 2007-9737. https://doi.org/10.13053/cys-23-1-3142.
In this paper a design of a graphical user interface (GUI), to observe polarization states changes on a standard single-mode optical fiber (SMF-28) that has been twisted, is presented. Here, we modify two different groups of parameters: 1) the input polarization ellipticity injected to an optical fiber; this is, the tilt or the angle of propagation and the intensity on each electric field or the shift phase; the other group is 2) the birefringence fiber values, mainly induced by mechanical efforts, since its fabrication either by pinching, bending or in general by manipulating it; obtaining simulated results that describes the output polarized light at the end of the fiber. The results are depicted on the Poncairé Sphere and Stokes parameters graphics. Moreover, the GUI was developed in Visual Basic, used for the interface windows, and it was connected to Matlab, used like mathematic engine.
Palabras llave : Birefringence; states of polarization; fiber optics; simulation.