Servicios Personalizados
Revista
Articulo
Indicadores
Citado por SciELO
Accesos
Links relacionados
Similares en SciELO
Compartir
Computación y Sistemas
versión On-line ISSN 2007-9737versión impresa ISSN 1405-5546
Resumen
TAQUIA GUTIERREZ, José Antonio y QUIROZ VILLALOBOS, Paul. Design and Implementation of an Automatic Control System using Motors and Control Sensors to Stabilize a Horizontal Platform with a LiDAR Sensor. Comp. y Sist. [online]. 2022, vol.26, n.1, pp.389-397. Epub 08-Ago-2022. ISSN 2007-9737. https://doi.org/10.13053/cys-26-1-3906.
Laser imaging detection and ranging (LiDAR) sensors can be used in numerous applications mainly due to their ability to measure distances or perform 3D surface mappings. However, to perform these functions efficiently in certain situations, such as in a moving vehicle, LiDAR sensors require a stabilizing platform to prevent terrain irregularities from affecting their measurements. Moreover, accurate platform control is one of the main challenges of modern control engineering. Although several approaches concerning this challenge have been proposed, the high computational cost of control algorithms continues to be their largest drawback. Within this context, the present work seeks to implement a control system to achieve the horizontal stabilization of a two-degree-of-freedom platform for a LiDAR sensor using inertial systems and embedded software platforms, thereby guaranteeing not only portability but also low computational costs.
Palabras llave : Sensors; Arduino; Matlab; Simulink; PID; Gimbal; LiDAR.
![](/img/en/iconPDFDocument.gif)