SciELO - Scientific Electronic Library Online

 
vol.20 número4Modelo de demanda de la actividad aérea en MéxicoAnálisis de la NOM-026-STPS-2008 en el laboratorio de manufactura para mejorar la productividad índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Ingeniería, investigación y tecnología

versión On-line ISSN 2594-0732versión impresa ISSN 1405-7743

Resumen

ALMAZAN-ARVIZU, Ricardo Yahir; LOZANO-HERNANDEZ, Yair; GUTIERREZ-FRIAS, Oscar Octavio  y  VILLAFUERTE-BANTE, Mario. Fuzzy-PI control of a magnetic levitation system through an embedded system. Ing. invest. y tecnol. [online]. 2019, vol.20, n.4, 00007.  Epub 15-Nov-2019. ISSN 2594-0732.  https://doi.org/10.22201/fi.25940732e.2019.20n4.043.

In the present work, the design and implementation of a control scheme is presented. The aim of the control scheme is to perform regulation and trajectory tracking tasks in the position of a magnetic levitation system, which acts by electromagnetic repulsion. Such levitation system consists of a beam operated by an active magnetic bearing in pendular configuration. Although the Proportional Integral Derivative (PID) controller shows arithmetic simplicity, ease of use, high robustness and error equal to zero in stable state (Pal & Mudi, 2008), the magnetic levitation system mathematical model is highly non-linear and is subject to uncertainty or variation of its parameters. Therefore, the PID control does not guarantee the fulfillment of trajectory tracking tasks (Precup & Hellendoorn, 2011). In summary, a diffuse PI is used due to the system non-linear dynamics and the hysteresis present in the electromagnet. The controller design was made with the following methodology: the mathematical model and the non-linear characteristics of the system are analyzed; the universes of error discourse (derived from error and control action) are experimentally measured. The experimental data was used for the fuzzification, defuzzification, statement of the rules and controller gains. The implemented rules were designed for a PD-Fuzzy in which a numerical integration of the control action was applied, obtaining a Fuzzy PI. Finally, the implementation was made on the STM32F407G-DISC card, which was programmed with MATLAB-Simulink software tools. The experimental results show that the proposed controller works even below the horizontal, where the behavior can show singularities or physical problems such as magnetization. In compliance with the stated objectives for a range of -5 to 10 radians, these results are maintained even in the presence of disturbances, demonstrating the feasibility of the controller.

Palabras llave : Magnetic levitation; PI fuzzy control; magnetic bearing; non-linear system; position control.

        · resumen en Español     · texto en Español