SciELO - Scientific Electronic Library Online

 
vol.25 número3Plasma copolymerization of pyrrole and ethylenglycol to obtain porous polymersEfecto de un agente compatibilizador sobre partículas de BaTiO3 dopadas con itrio en el comportamiento dieléctrico de compósitos de hule silicón índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Superficies y vacío

versión impresa ISSN 1665-3521

Resumen

PUENTE-URBINA, B. A.; GARCIA-CERDA, L. A.; DE LEON-QUIROZ, E. L.  y  LOPEZ-MARTINEZ, M. G.. Nanopartículas de Ni/NiO y Cu-Ag obtenidas mediante el método de Pechini: síntesis y caracterización. Superf. vacío [online]. 2012, vol.25, n.3, pp.183-187. ISSN 1665-3521.

In this paper we study the synthesis and characterization of nanoparticles of Ni/NiO and Cu-Ag obtained by Pechini route. Gel precursors were prepared and the molar ratio of citric acid to metal salts was varied in order to study its effect on the obtained materials. The gel precursors were calcined at temperatures between 350 and 450 ° C in air for different times. The structural and morphological characterization was performed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results of X-ray diffraction showed the formation of nanoparticles of different metals and its alloys. The obtained phases were controlled by temperature and time of calcination. Transmission electron microscopy micrographs showed that in general the particles obtained have a size less than 20 nm.

Palabras llave : Nanoparticles; Sol gel; Pechini; Cu-Ag; Ni/NiO.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons