SciELO - Scientific Electronic Library Online

 
vol.11 número5A PSO Procedure for a Coordinated Tuning of Power System Stabilizers for Multiple Operating ConditionsTowards the Design of Safety-Critical Software índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Journal of applied research and technology

versión On-line ISSN 2448-6736versión impresa ISSN 1665-6423

Resumen

BELHOCINE, A.  y  BOUCHETARA, M.. Temperature and Thermal Stresses of Vehicles Gray Cast Brake. J. appl. res. technol [online]. 2013, vol.11, n.5, pp.674-682. ISSN 2448-6736.

The main purpose of this study is to analyze the thermomechanical behavior of the dry contact between the brake disc and pads during the braking phase. The simulation strategy is based on computer code ANSYS11. The modeling of transient temperature in the disc is actually used to identify the factor of geometric design of the disc to install the ventilation system in vehicles. The thermo-structural analysis is then used with coupling to determine the deformation established and the Von Mises stresses in the disc, the contact pressure distribution in pads. The results are satisfactory when compared to those found in previous studies.

Palabras llave : Brake discs; Von Mises stress; contact pressure.

        · texto en Inglés

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons