Resumen

MANSOOR, Muhammad  y  SHAHID, Muhammad. Carbon nanotube-reinforced aluminum composite produced by induction melting. J. appl. res. technol [online]. 2016, vol.14, n.4, pp.215-224. ISSN 2448-6736.  https://doi.org/10.1016/j.jart.2016.05.002.

Aluminum/carbon nanotube composite is a promising candidate material for aerospace applications owing to its high strength-to-weight ratio. Because of the low density of carbon nanotubes (CNTs), their dispersion is difficult in molten metal. We investigated induction melting, a fairly distinct approach to facilitate the dispersion of CNTs in molten aluminum. The nanocomposites were characterized using scanning electron microscopy, X-ray diffraction, transmission electron microscopy and mechanical testing. Refinement in crystallite size (∼320 nm) and increase in lattice strain (∼3.24 × 10−3) were observed in the composites. A simultaneous increase in yield strength (∼77%), tensile strength (∼52%), ductility (∼44%) and hardness (∼45%) was observed. Induction melting appeared to be a potential method to fabricate aluminum-CNTs composites.

Palabras llave : Metal-matrix composites (MMCs); Induction melting; Crystallite size; Lattice strain; Mechanical properties; Fractography.