Resumen

SERRANO PEREZ, Edgar et al. Sequential microcontroller-based control for a chemical vapor deposition process. J. appl. res. technol [online]. 2017, vol.15, n.6, pp.593-598. ISSN 2448-6736.  https://doi.org/10.1016/j.jart.2017.07.003.

A cost-effective direct liquid injection system is developed for a chemical vapor deposition process using a microcontroller. The precursor gas phase is controlled by the precise sequential injection of a liquid precursor solution to a vaporizing chamber prior deposition. The electronic control system allows the human-machine interface through a LCD display and a keypad matrix. The core of the electronic system is based on an electro mechanical injector operated in time and frequency as a sequential control system by a popular PIC16F877A chip. The software has been developed in the BASIC language and it can be easily modified through an ICSP programmer for different sequential automatized routines. The injection calibration test has proven the linearity of the injection control system for different operation parameters. The results reported the sequential injection MOCVD deposition of alumina thin film.

Palabras llave : Microcontroller; Chemical vapor deposition; Direct liquid injection; Thin films.