Servicios Personalizados
Revista
Articulo
Indicadores
Citado por SciELO
Accesos
Links relacionados
Similares en SciELO
Compartir
Revista ALCONPAT
versión On-line ISSN 2007-6835
Resumen
RAMIREZ-SOTO, J. C. I. et al. Effect of buttering in mechanical properties of dissimilar metal weld joints for reinforcement bars in concrete structures. Rev. ALCONPAT [online]. 2016, vol.6, n.3, pp.248-260. ISSN 2007-6835. https://doi.org/10.21041/ra.v6i3.151.
In this work, the influence of Inconel 182 as buttering material in the mechanical properties of dissimilar metal welds between plain carbon steel and stainless steel bars welded using SMAW has been investigated by using microstructural analysis, Vickers microhardness testing, and tensile tests. Welding with SMAW process is commonly applied in field welding of concrete structures. Therefore, this process was selected for this work. The results indicated that even if the joints contain defects generated by the welder, the mechanical properties of dissimilar welded joint without buttering are higher than the properties of joints with buttering. This methodology is proposed for the rehabilitation of concrete structures with steel bars as reinforcement, which are located in maritime enviroments.
Palabras llave : buttering, dissimilar metal weld joints; mechanical properties; microstructure; defects.
![](/img/en/iconPDFDocument.gif)
![](/img/en/iconPDFDocument.gif)
![](/img/en/iconPDFDocument.gif)