nueva página del texto (beta)
Inglés (pdf)
Artículo en XML
Referencias del artículo
Traducción automática
Enviar artículo por email
Citado por SciELO 
Similares en
SciELO 
Permalink
1. Introduction
This paper investigates the effects of government support and containment measures on the manufacturing production cycle of 39 nations, including Mexico, during the COVID-19 pandemic. To capture the impact of closure and containment measures as well as vaccination endeavors on the manufacturing output cycle, we make use of the containment and health index (CHI). Such an index comprises the actions undertaken by governments in 13 different areas, such as school and workplace closing, restrictions on traveling and internal movements, testing and contact tracing policies, vaccination funding, and emergency health care investments (Hale et al., 2021). Moreover, government support measures are captured by three key indicators:
The income support index, which reflects the extent to which the government of a given country is reacting to the pandemic by: 1.1) Making direct cash payments to the unemployed and other people in need, 1.2) Granting temporary subsidies to private enterprises to prevent job losses, and 1.3) Providing financial aid to households or firms.
The index of debt/contract relief for households. This index captures to what degree a government is implementing temporary measures such as: 2.1) Delaying tax payments, 2.2) Freezing mortgages and other loan repayments to private banks, 2.3) Stopping evictions, and 2.4) Ensuring the provision of services like water and electricity regardless of payment (Government Response Tracker (OxCGRT) Coding Interpretation Guide, 2022).
To reflect the impact of monetary policy actions on the manufacturing production cycle (MPC, hereafter), we make use of the real policy-related interest rate.
To account for the external sector, we employ the real effective (or multilateral) exchange rate based on consumer price indices.1
To the best of our knowledge, the impact of this set of variables on the MPC has not been studied, so we attempt to fill this gap in the empirical literature. The analysis of the MPC and its determinants is relevant not only because the manufacturing sector is a major source of job creation, but also because it generates more learning by doing activities (LBD), greater positive externalities, and better prospects for export expansion and for attracting foreign direct investment (FDI) than other sectors of the economy (Sachs and Warner, 1995; Gylfason and Zoega, 2006). Our econometric work relies on a dynamic panel data model, which comprises 39 nations and monthly data from January 2020 through December 2021. The number of cross-section units (or nations) is restricted because some countries provide insufficient data (or not data at all) for at least one of the variables of the model. Given that the econometric methods employed here require a sufficiently large number of cross-section units (i.e., countries), for reasons of data availability our 39-nation group consists of 28 high-income countries and 11 upper-middle-income countries. Mexico, of course, belongs to the upper-middle-income country subgroup. Appendix 1 contains the complete list of nations.
To increase the robustness of the findings, we make use of two versions of the Generalized Method of Moments (GMMs) to estimate the panel data model: 1) The Arellano-Bond GMMs (1991), and 2) The Arellano-Bover GMMs (1995). When the number of cross-section units (N) exceeds the number of time periods (T), the Arellano-Bond GMMs is not only consistent but also robust to endogeneity problems, and these properties hold regardless of the behavior of the error term (Arellano and Bond, 1991; Ahn and Schmidt, 1995; Baltagi, 2008, pp. 147-155). So, when N>T and the sample is large, the Arellano-Bond GMMs estimator basically requires no information as to the behavior of the model residuals. In this study, N(=39)>T(=24) and there is a fairly large number of observations: 858 for each variable after adjusting for the loss of data caused by the presence of a lagged dependent variable and a set of instrumental variables. Nonetheless, we also resort to the Arellano-Bover GMMs estimator, which in relatively small samples tends to yield smaller standard deviations and even lower biases than the Arellano-Bond GMMs estimator (Hayakawa, 2009). Moreover, to further improve the efficiency of the estimations in a finite-sample setting, we include some remedial measures for residual heteroscedasticity and correlation.
As we shall see, the evidence is very consistent across econometric methods and remedial measures. Broadly speaking, the evidence shows that closure and containment measures are recessionary, just as expected. Moreover, income support measures, debt relief measures, and expansionary monetary policies are effective in boosting manufacturing production. Lastly, real exchange rate depreciation may not encourage manufacturing production and could even discourage it in the short term. Put differently, it could even exert a negative influence on the MPC. As we shall see, there are four reasons behind this finding, one of them being that real currency depreciation raises the domestic currency costs of a range of imported intermediate inputs, which are used intensively in manufacturing production.
The rest of this paper is organized as follows. Section 2 is a brief review of the empirical literature. Section 3 describes the empirical model, the estimation methods, and the variables involved. Section 4 presents the empirical evidence. Finally, as part of the conclusions, we summarize the findings and discuss their policy implications.
2. Literature review
2.1 The negative impacts of containment and closure
While partial and full lockdowns were useful to cope with the virus, they caused a myriad of factories to either close or drastically cut back working hours, thus generating supply-side disruptions across countries. In some cases, lockdowns interacted with a growing critical mass of people getting infected to impair a bulk of services, which were critical to the normal functioning of the economy. Although demand- and supply-side forces were both behind the global economic downturn, global supply chains (GSCs) concentrated most of the impact of pandemic-related policies (Maital and Barzani, 2020). Along these lines, the bottlenecks in industries like semiconductors and electronic equipment have been a major concern across the world, given that those components are widely used in the medium- and high-technology sectors responsible for providing durable goods to households, in addition to machinery and equipment to enterprises (Akbulaev, Mammadov and Aliyev, 2020).
On the demand side, restrains on international traveling and domestic movements, coupled with public places closings, have had a crushing effect on the service sector, mainly in hotels, restaurants, land and air transportation services, entertainment and recreation activities, and wholesale and retail commerce (Yeh, 2021). Also, the closing of commercial shopping centers, office buildings, restaurants, coffee shops, and bars, coupled with the abandonment of flats in residential areas, dragged down the real estate markets (Balemi, Füss and Weigand, 2021). In this context, residential and, to a much greater degree, commercial real estate experienced hard times (Balemi, Füss, and Weigand, 2021). In the countless cases where factories had to shut down for good, even industrial real estate battled to remain afloat. Amid soaring vacancy rates, residential, commercial, and industrial property sales went down, so developers and other investors incurred sizeable losses. Furthermore, with rising unemployment rates, landlords struggled to collect rents or even faced rent moratoriums, whereas mortgage defaults rates rose. The resulting increase in mortgage foreclosures brought down house prices which, in turn, led to new rounds of foreclosures (Capponi, Jia, and Rios, 2021).
Broadly speaking, closure and containment policies slowed down the propagation of the virus, saved lives, and lessened the burden on national health systems, but they also caused supply-side disruptions and delivery problems which, ultimately, put many micro, small and medium-sized enterprises (MSMEs) out of business (Makin and Layton, 2021; Susskind and Vines, 2020; Antonescu, 2020). MSMEs have been vulnerable to partial and full lockdowns, especially the ones operating within the tourism, entertainment, and recreation industry. In the face of falling sales and revenues, MSMEs frequently lack the financial resources to pay wages, banking debts, rents, utilities, and taxes (Antonescu, 2020). These firms can even run out of input supplies due to liquidity problems.
Analyzing the impact of the COVID-19 pandemic on MSMEs, Antonescu (2020), Kurmann, Lalé, and Ta (2020), and Shafi, Liu, and Ren (2020), highlight the greater likelihood of bankruptcies and layoffs in this sector. In this context, increasing business failures, climbing unemployment, and lower private agents’ confidence, induced households to purchase fewer durable goods and producers to delay investment decisions, so demand for capital goods also dropped. As a result of the second-order effects stemming from unemployment hikes, business liquidations, and lower confidence among consumers and producers, aggregate demand continued to fall. With consumer demand and private investment plummeting worldwide, and with global supply chains seriously affected, international trade basically collapsed (Barlow, van Schalkwyk, McKee, Labonté, and Stuckler, 2021). Declining economic activity and lower international trade had a negative impact on government revenues,2 making it more difficult for developed and developing nations to maintain social safety nets (Barlow, van Schalkwyk, McKee, Labonté, and Stuckler, 2021). As industrial production declined all over the world, so did imports of intermediate inputs and raw materials, including oil. Regarding the financial sector, as firms in the hardest-hit industries failed to pay their loans and unemployed people defaulted on mortgages, banks’ delinquency rates increased. Therefore, the financial situation of banks across the world began to deteriorate as well (Balemi, Füss, and Weigand, 2021).
In times of economic hardship, most industries lose but a few can win. During the worst episode of the pandemic, food delivery businesses and internet services were among the winners (Akbulaev, Mammadov, and Aliyev, 2020). With the booming demand for remote work services (mainly, online teaching and home office), the information-and-communication-technology industry gained substantially. Such an industry also gained because of soaring online purchases. Moreover, demand for medical supplies, all kinds of drugs, cleaning and sanitation products, and hospital equipment (such as ventilators) skyrocketed (Economic Commission for Latin America and the Caribbean (ECLAC, 2020)). The big pharmaceutical companies profited from increasing purchases of medications, treatments, and COVID-19 tests, as well as from government subsidies in support of vaccines development efforts (Ayati, Saiyarsarai, and Nikfar, 2020).
In many nations, the winning group also included food markets and the overall agricultural industry. According to Perez et al. (2021), during the COVID-19 pandemic, not only did governments exempt the agricultural sector and the food distribution system from pandemic-related restrictions, but they prioritized food production given the need of preventing further deterioration of household welfare. Lastly, the health sector has also been marked as a winner, given that its infrastructure was significantly enhanced during the pandemic (ECLAC, 2020). In the case of private health care providers, their profits surged together with the demand for their services.
2.2 The countermeasures and their effectiveness
Many nations implemented economic support programs to alleviate the effects of the crisis on firms, especially MSMEs, and households. Among other things, those programs sought to protect production capacities and workers’ expertise, mainly to avert a permanent rise in unemployment rates. Broadly speaking, economic aid packages involved income support measures and debt/contract relief measures, which were complemented by expansionary monetary policies. Income support measures involved: 1) Direct cash transfers (or subsidies) to the hardest-hit industries, such as hotels, restaurants, land and air transportation services, entertainment and recreation activities, and wholesale and retail commerce,3 2) In some cases, financial assistance was also granted to big private corporations facing working capital problems in exchange for employment retention programs, 3) Direct financial support to self-employed people as well as other citizens in need, 4) Broader coverage of the unemployment compensation programs, and 5) Interest-free loans (Akbulaev, Mammadov and Aliyev, 2020; Makin and Layton, 2021; The International Monetary Fund (IMF) Policy Tracker).
The debt/relief programs consisted of: 1) Deferment of some tax and social fees payments, 2) Grace periods or temporary reductions in rents and utilities, 3) Freezing mortgages and other loan repayments to private banks, and 4) Stopping evictions for a given period (Akbulaev, Mammadov and Aliyev, 2020; Makin and Layton, 2021; The IMF Policy Tracker). Finally, to stimulate interest-sensitive consumption spending as well as private investment, many central banks resorted to lowering their policy-related interest rates (Maital and Barzani, 2020). To further increase liquidity, the monetary authorities reduced legal reserve requirements and supplied assistance to financial institutions through the money market (ECLAC, 2020).
Among the empirical papers devoted to studying the effects of fiscal and monetary policies on real variables during the COVID-19 pandemic, the following stand out. Chudik, Mohaddes and Raissi (2021) resort to a threshold-augmented Vector-Autoregression technique to assess the impact of fiscal policy in a sample of 33 countries. In this context, they show that expansionary fiscal policies were useful to reduce output losses during the pandemic, not only in advanced economies but also in emerging and developing economies.
For their part, Barišić and Kovač (2022) evaluate the impact of fiscal policy measures in 26 (out of the 27) European Union economies. Using regression analysis and Okun’s law, they show that the fiscal policy actions undertaken during the second quarter of 2020 were generally effective in lowering short-term unemployment. Over the long-term horizon, these authors provide some (counterfactual) evidence that, in the absence of a fiscal stimulus, the pandemic would have had a stronger negative effect on potential GDP growth.
Rather than analyzing a large group of nations, some empirical works focus on one or two nations. In the case of Thailand and Vietnam, Bui, Dräger, Hayo, and Nghiem (2022) assess the effects of fiscal policy measures on households during the pandemic. Based on consumer surveys, they provide evidence that, during 2020, government support to households strengthened consumer confidence, raised consumer spending on durable goods, and improved the general economic outlook. Using a general equilibrium model for the Chinese economy, Liu et al. (2021) produce evidence that fiscal and monetary policies were effective in counteracting the effects of the pandemic on economic activity and unemployment. Nonetheless, these authors highlight two drawbacks of fiscal and monetary expansion in the Chinese economy, namely higher inflation and lower exports.
To analyze the impact of taxes, transfers, and subsidies on Italy’s Gross Domestic Product (GDP) during the great lockdown, Di Pietro, Marattin and Minetti (2020) resort to a calibrated macroeconomic model. In this context, they show that the Italian fiscal package softened to a certain degree the negative impact of the pandemic on GDP, whereas a hypothetical stronger fiscal boost would have been more effective but at the expense of compromising government finances. Along the same lines, Romer (2021) argues that the significant US fiscal expansion, coupled with the increased private saving rate associated with the pandemic, will generate economic growth in the long term, with the caveat that the resulting increase in government debt (as a share of GDP) may reduce the scope for future fiscal maneuver. As to the role played by US monetary policy, Feldkircher, Huber and Pfarrhofer (2021) make use of the VAR technique to demonstrate that monetary expansion caused output growth as well as a depreciation of the dollar amid the pandemic.
Against this backdrop, our research evaluates the effects of fiscal and monetary countermeasures on the MPC, which is something that, to the best of our knowledge, has not been done. Moreover, we weigh fiscal and monetary actions against closure and containment measures.
3. Model specification, data issues, and econometric methodologies
The next task is to specify the determinants of the MPC, describe the variables involved and the treatment of the data, and explain the pros and cons of the econometric methodologies employed. The selection of explanatory variables is consistent with economic theory and allows us to assess the role played by closure and containment measures, fiscal and monetary policy actions, and real multilateral exchange rate fluctuations. However, the larger the number of countries included in the panel, the smaller the set of variables for which complete statistical series are available. Given this tradeoff and the fact that the dependent variable is not manufacturing production itself but the manufacturing production cycle, we put forward the following model:
where the subscripts i and t denote the country and the year, and
Finally,
In this context, Equation (1) is estimated by two econometric methods: 1) The Arellano-Bond GMMs (1991), and the Arellano-Bover GMMs (1995). Broadly speaking, the Arellano-Bond GMMs takes care of the following potential problems: First, the dependent variable
By first-differencing the data, the cross-section error term
The next step is to address serial correlation and heteroscedasticity by combining this set of instruments with a sequential Generalized Least Squares (GLS) procedure, which gives rise to the Arellano-Bond first-, second-, and n-step consistent estimators. In this context, it has been shown that when the number of cross-section units (N) in the panel is greater than the number of periods (T), the Arellano-Bond GMMs has three advantages: 1) It is free of endogeneity problems, 2) It is consistent, and 3) It is reliable regardless of the initial behavior of the error term (Arellano and Bond, 1991; Ahn and Schmidt, 1995; Baltagi, 2008, pp. 147-155). In fact, the first- and second-step consistent estimators are equivalent in large samples when, from the start, the model residuals are homoscedastic and uncorrelated (Baltagi, 2008, p. 150).
As we have shown, the Arellano-Bond (1991) GMMs transforms the data by taking first differences. In contrast, the Arellano-Bover (1995) GMMs makes use of what is known as forward orthogonal deviations (FODs). Both procedures are useful to eliminate the cross-section error term
where
For each variable of the model, we gathered monthly data from January 2020 to December 2021 for the 39 countries of the sample. As stated before, this means that there are 858 observations for each variable, once we have adjusted for the loss of data due to the presence of a lagged dependent variable and a set of instrumental variables.Appendix 1 contains the list of the 39 the countries involved in the analysis, whereas Appendix 2 explains the measurement units and data sources for each variable.
4. Empirical evidence
As is well known, when working with time-series equations, there are basically two types of problems with the model’s residuals that compromise efficiency: correlation and heteroscedasticity across time. However, when working with panel equations there are four types of problems: time-series correlation and heteroscedasticity, on the one hand, and cross-section correlation and heteroscedasticity, on the other. We deal with these four problems in three ways:
By making use of two robust estimation methods: the Arellano-Bond GMMs and the Arellano-Bover GMMs. When N>T and the sample is large, as in this case, the Arellano-Bond GMMs is consistent, robust to endogeneity problems, and basically requires no information concerning the behavior of the residuals (Arellano and Bond, 1991; Ahn and Schmidt, 1995; Baltagi, 2008, pp. 147-155). Considering the value of T and N, and the loss of data due to the use of a lagged dependent variable and a set of instrumental variables, we have 858 observations for each variable, which is quite reasonable. Nonetheless, we also make use of the Arellano-Bover GMMs, which in relatively small samples is proven to yield even lower standard deviations and biases (Hayakawa, 2009).
We make use of a white period instrument weighting matrix under both econometric methods: the Arellano-Bond GMMs and the Arellano-Bover GMMs. The white period instrument weighting matrix is a good remedial measure for serial correlation.
We also resort to coefficients’ white period standard errors and covariance, which is a coefficients variance-covariance method that is robust not only to serial correlation, but also to heteroscedasticity across time. This coefficients covariance method is useful to further enhance efficiency and is available for the Arellano-Bover as well as for the Arellano-Bond estimator.
In this context, we estimate Equation (1) by the two econometric methodologies: the Arellano-Bond GMMs and the Arellano-Bover GMMs. In addition, we make use of the remedial measures previously mentioned: 1) The white period instrument weighting matrix, and 2) The white period standard errors and covariance. Table 1 displays the estimations results:
Table 1 Dynamic panel data models
| The Arellano-Bond GMMs, which is based on first differencing | The Arellano-Bover GMMs, which is based on forward orthogonal deviations | ||
|---|---|---|---|
| Dependent variable: |
Dependent variable: |
||
| Explanatory variables | Coefficients | Explanatory variables | Coefficients |
|
|
0.579949*** |
|
0.592617*** |
|
|
-0.139666*** |
|
-0.059990*** |
|
|
1.573109*** |
|
1.339657*** |
|
|
3.038778*** |
|
2.437481*** |
|
|
-0.961637*** |
|
-0.778582*** |
|
|
-0.093145* |
|
-0.078896*** |
| Econometric methods: The Arellano-Bond GMMs, based on first-difference transformation, and the Arellano-Bover GMMs, based on forward orthogonal deviations (FODs). | |||
| GMMs weights: White period instrument weighting matrix | |||
| Coefficients covariance method: White period standard errors and covariance (corrected for d.f). | |||
|
Notes:
| |||
Source: Authors’ estimations based on information from the data sources depicted in Appendix 2 and the use of EViews 12.
The second column of Table 1 shows the estimation results under the Arellano-Bond GMMs estimator, whereas the fourth column shows the estimation results under the Arellano-Bover GMMs estimator. Before interpreting the signs and statistical significance of the parameter estimates, we will display the outcome of the Arellano-Bond test for serial correlation, which is useful only to detect first- and second-order autocorrelation. According to Arellano and Bond (1991), if the error term in Equation (1) is identically independently distributed, then the error term in Equation (2) should show two things: 1) Negative first-order autocorrelation, and 2) No second order autocorrelation. Along these lines, Table 2 shows that the probability values for the null hypotheses of first- and second-order autocorrelation are 0.1025 and 0.6046, respectively. Therefore, there is no second-order autocorrelation, but we fail to establish -in the margin, given that the probability value is slightly higher than 0.10- the presence of negative first-order autocorrelation in the underlying residuals as Arellano and Bond require. Although these results are reasonably good, we deemed appropriate to implement the remedial measures previously mentioned.
Table 2 Arellano-Bond (AB) test for autocorrelation
| Null hypothesis | m-statistic | Probability value |
|---|---|---|
| Absence of first-order autocorrelation | -1.632784 | 0.1025 |
| Absence of second-order autocorrelation | -0.517800 | 0.6046 |
Note: The AB autocorrelation test applies only to first- and second-order serial correlation.
Source: Authors’ estimations based on information from the data sources depicted in Appendix 2 and the use of EViews 12.
Another important test available for the Arellano-Bond and the Arellano-Bover estimators is the test of exogeneity of the instruments. Put differently, in addition to being correlated with the regressors, the instruments must be uncorrelated with the error term (i.e., they must be exogenous). Table 3 shows the results of the test of exogeneity of the instruments under both econometric methods.
Table 3 J-test of exogeneity of the instruments
| Arellano-Bond GMMs | Arellano-Bover GMMs | ||
|---|---|---|---|
| J-statistic | Probability value | J-statistic | Probability value |
| 35.98523 | 0.330510 | 37.29138 | 0.278180 |
| Null hypothesis: all the instruments are uncorrelated with the error term | |||
Note: GMMs= Generalized Method of Moments.
Source: Authors’ estimations based on information from the data sources depicted in Appendix 2 and the use of EViews 12.
According to Table 3, the probability values for the null hypothesis that “all the instruments are uncorrelated with the error term” are 0.330510 for the Arellano-Bond GMMs and 0.278180 for the Arellano-Bover GMMs. This means that such a null hypothesis cannot be rejected and, therefore, the instruments are valid. In this context, the next step is to briefly summarize the findings displayed in Table 1:
The coefficient of the lagged dependent variable is statistically significant at the 1% level in the two cases. This means that the past behavior of the manufacturing production cycle (MPC) is a key driver of the current behavior. Therefore, the MPC involves an inertial (or predetermined) component. The stronger this inertial component is, the more difficult is for fiscal and monetary policies to influence the MPC.
The containment and health index (CHI) has a negative estimated coefficient, which is statistically significant at the 1% level under both econometric methods. As stated earlier, this is a comprehensive index encompassing 13 policy areas. So, broadly speaking, a negative coefficient in this case reflects the recessionary effects of the closure and containment measures previously described.
The parameter estimate associated with income support measures (IS) is positive and statistically significant at the 1% level in both regressions. And the same applies to the estimated coefficient of debt contract relief (DR). Therefore, countercyclical fiscal policies are effective in encouraging manufacturing output.
The estimated parameter of the real policy-related interest rate (R) is negative and statistically significant at the 1% level in both cases, which means that lower interest rates would boost manufacturing production.
The coefficient of the real multilateral exchange rate (Q) is negative and statistically significant at the 1% level under the Arellano-Bover GMMs and at the 10% level under the Arellano-Bond GMMs. Thus, as we argue below, real exchange rate depreciation lowers manufacturing output growth, at least in the short term.
5. Conclusions and policy implications
This paper relies on a dynamic panel data model involving 39 countries and monthly observations from January 2020 to December 2021. To enhance the robustness of the evidence, the model is estimated through two econometric methods. The first is the Arellano-Bond GMMs, which for N>T is consistent, free of endogeneity problems and basically requires no information regarding residual behavior (Arellano and Bond, 1991; Ahn and Schmidt, 1995; Baltagi, 2008, pp. 147-155). Although the number of observations for each variable is reasonably large (858), we also resort to the Arellano-Bover GMMs, which in finite samples performs even better in terms of standard deviations and biases (Hayakawa, 2009). Using the tools at hand for these econometric methods,7 we further improve efficiency by implementing remedial measures for serial correlation and heteroscedasticity across time.
The evidence across econometric methods is very consistent in indicating that:
The MPC has a strong predetermined or inertial component, given the statistical significance of the coefficient linked to the lagged dependent variable. This means that a dynamic panel data model is a suitable specification and the effects of the exogenous regressors is contingent upon the past behavior of the MPC. Moreover, the stronger the inertial component of the MPC is, the more difficult is for fiscal and monetary policies to alter the course of the MPC.
Closure and containment measures, which are captured by the CHI, have been clearly recessionary. The deep negative impact on global economic activity must be explained not only by the nature and severity of these measures, but also by their worldwide implementation. Therefore, to normalize global production chains, reactivate consumption and investment, and generate positive spillover effects through international trade, there must also be a coordination of national economic policies (Susskind and Vines, 2020; McKibbin and Vines, 2020) addressing the demand- as well as the supply-side factors behind the crisis (Maital and Barzani, 2020). As the reader may recall, those factors were analyzed in the literature review.
Income support measures seem to be effective in raising manufacturing production, and the same conclusion applies to debt contract relief for households. Put differently, in times of crisis, enhancing consumption through higher income (i.e., direct financial support to the unemployed and other people in need) can be effective in raising manufacturing production and creating jobs. On the other hand, direct cash transfers to MSMEs and financial assistance to big corporations is key to preventing bankruptcies and thus preserving production capacities, so that workers can remain in the same job or industry. In this manner, the accumulated work experience can be protected insofar as workers won’t have to shift from one job to another that requires a different set of skills (Akbulaev, Mammadov, and Aliyev, 2020).
An expansionary monetary policy in the form of interest rate cuts has clearly a positive impact on the MPC. This highlights the importance of cheaper credit to consumers and investors to stimulate manufacturing production. One caveat to this conclusion is that the implementation of expansionary fiscal and monetary policies must go through very gradual stages given the time it takes for global production chains to normalize even when proper supply-side policies are in place.
The real multilateral exchange rate is negatively related to the manufacturing production cycle, regardless of the econometric method employed. Put differently, our evidence is consistent in indicating that real currency depreciation discourages manufacturing output. This result holds at the 1% significance level under the Arellano-Bover estimator, and at the 10% significance level under the Arellano-Bond estimator. Nonetheless, as previously stated the Arellano-Bover estimator is more reliable when the sample size is not too large. Conventional economic theory suggests that exchange rate depreciation raises manufacturing output by boosting manufacturing sales abroad. Therefore, a plausible interpretation of our finding is that real currency depreciation influences manufacturing production through two channels working in opposite directions. The demand-side channel of currency depreciation stimulates manufacturing output by making manufacturing products abroad cheaper, whereas the supply-side channel of currency depreciation discourages manufacturing production by making imported intermediate inputs more expensive. In this manner, our result underlines the prevalence of the supply-side channel of currency depreciation over the demand-side channel, at least in the short term. There are several reasons behind this conclusion:
The increasing role of international production sharing has made manufacturing firms across the world more dependent on imported parts, components, and materials. Therefore, currency depreciation increases the local currency costs of all those imported intermediate inputs, which in turn tends to deteriorate manufacturing export performance. Along these lines, the higher the import content of manufacturing exports is, the stronger the supply-side effect of currency depreciation becomes.
By reducing manufacturing exports and production, exchange rate depreciation could result in scale contraction for many manufacturing firms, thereby reducing productivity levels. In this regard, Fung and Liu (2009) analyze the effect of exchange rate depreciation on manufacturing domestic and foreign sales, value-added and even productivity. However, those authors highlight the demand-side effect of currency depreciation on Taiwanese manufacturers.
Closure and containment measures disrupted trade flows, investments, and international production sharing, giving rise to bottlenecks in the production of numerous critical parts and components for the manufacturing sector. In this context, during the great lockdown, currency depreciation interacted with production shortfalls to make all those inputs even more costly.
Exchange rate depreciation often entails higher exchange rate volatility, which also worsens the export growth prospects of manufacturing firms (Zia and Mahmood, 2013). This negative impact on export performance may be stronger for those manufacturing firms holding net liabilities in foreign currency, in addition to producing goods with a high import content. Higher exchange rate volatility could also reduce investment by raising uncertainty.
Regardless of the direction of minor exchange rate movements, manufacturing exports could hardly increase amid falling global demand and recession.
Disentangling the transmission channel through which real exchange rate depreciation could lower manufacturing output is beyond the scope of this investigation. However, the increasing role of global supply chains and processing trade is consistent with the view that the supply-side effect of exchange rate fluctuations is gaining force vis-à-vis the demand-side effect. In this context, weakening the domestic currency may not be the best alternative to raise manufacturing output, at least over the short-term horizon.
