Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Similares en SciELO
Compartir
Journal of applied research and technology
versión On-line ISSN 2448-6736versión impresa ISSN 1665-6423
Resumen
ABDELALL, Esraa S.; AL-DWAIRI, Abdullah F.; DARABSEH, Safa M. Al y AL-RABA’A, Shatha. Investigating the feasibility of depositing AA6061-T6 alloy over mild steel by friction surfacing. J. appl. res. technol [online]. 2022, vol.20, n.2, pp.126-135. Epub 27-Ene-2023. ISSN 2448-6736. https://doi.org/10.22201/icat.24486736e.2022.20.2.1735.
This paper examines the feasibility of using friction surfacing to deposit Aluminum alloy AA6061 material over an AISI 1017 steel substrate. Furthermore, this work aims to identify the deposition speed settings that would improve the effectiveness of the process. Consumable AA6061-T6 rods were deposited at different rotational and travel speeds combinations while maintaining the same axial pressing force. The experiment involved 12 speed combinations with three replicates from each combination. Quantitative and qualitative methods were used to evaluate speed effects on the overall deposition quality. The evaluation involved different quality indicators including deposition efficiency and stability, surface roughness, deposit hardness and microstructure. Analysis has shown that rotational speed is the primary factor that significantly affects the studied indicators. On the other hand, the travel speed was found to have significant effects only on deposition efficiency and material hardness.
Palabras llave : Friction surfacing; solid state welding; roughness; deposition efficiency; hardness.