Servicios Personalizados
Revista
Articulo
Indicadores
Citado por SciELO
Accesos
Links relacionados
Similares en SciELO
Compartir
Nova scientia
versión On-line ISSN 2007-0705
Resumen
LOPEZ VARGAS, E. et al. Assessment of cast steel anchorage fracture toughness of a cable-stayed bridge by small punch test. Nova scientia [online]. 2018, vol.10, n.20, pp.244-262. ISSN 2007-0705. https://doi.org/10.21640/ns.v10i20.1316.
The assessment of the residual lifetime of in-service structural components requires knowledge of fracture toughness values; however, conventional test methods for measuring fracture toughness demand the removal of large material samples from components, which generally is impractical. Recently, the Small Punch Test (SPT) (which utilizes nonstandard miniature specimens) has been used as a practical and convenient alternative for evaluating fracture toughness characteristics of the material of components in service. The purpose of this research was to find a correlation between the SPT equivalent fracture strain εqf and the fracture toughness JIC of low-alloy cast steels coming from anchorages of a cable-stayed bridge, which is located in the Gulf of México. Fracture toughness was calculated from KIC experimental data from previous work and equivalent fracture strain εqf was obtained by SPT using specimens 10×10 mm2 squares of 0.5 mm thickness. From εqf and JIC results and corresponding low-alloy steel experimental data from literature, a linear correlation was proposed to estimate fracture toughness from SPT equivalent fracture strain for cast steels belonging to this study case.
Palabras llave : small punch test; fracture toughness; low-alloy cast steel; cable-stayed bridge; anchorage.