Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Similares en SciELO
Compartir
Tecnología y ciencias del agua
versión On-line ISSN 2007-2422
Resumen
ZIMMERMANN, Erik D. y BASILE, Pedro A.. Estimation of hydraulic parameters in silty soils using different pedotransfer functions. Tecnol. cienc. agua [online]. 2011, vol.2, n.1, pp.99-116. ISSN 2007-2422.
This paper presents different procedures that have been used to estimate hydraulic properties of silt soils, representative of a sector of the Argentinean flatlands. Grain size, and physicochemical information of soil maps printed by the National Agriculture Technology Institute (INTA) were used. Pedotransfer functions (PTF) included in the SOILPAR codes (Acutis and Donatelli, 2003) and Rosetta (Schaap et al., 1999) together with empirical relationships proposed by other authors were used. For the set of 136 analyzed samples of soils, the application of the procedures showed an important dispersion of results. Consequently, the PTF applied must be used with caution, and the compatibilities between the studied soil samples and those that were used originally in the proposed equations must be analyzed. The average parameters estimated in the Ludueña basin (Santa Fe, Argentina) were compared with values obtained by calibration of a hydrologic mathematical model. The results showed that the Rosetta code with complete information (textural composition, bulk density and two points of the retention curve) had better prediction of hydraulic parameters than the other methods. The formulations of Saxton et al. (1986) for saturated hydraulic conductivity and Wosten et al. (1999) for van Genuchten’s parameter α can be alternatively used to the Rosetta model. The results reached to date are promissory, and validate the methodology for its application in other regional river basins.
Palabras llave : silty soils; hydraulic parameter; pedotransfer functions; flatlands of Argentina.