SciELO - Scientific Electronic Library Online

 
 número105Factores de amortiguamiento para espectros de desplazamiento de sistemas con disipadores de energía histeréticosPruebas de vibración ambiental en un edificio durante su proceso de reforzamiento índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Ingeniería sísmica

versión impresa ISSN 0185-092X

Resumen

BARRADAS HERNANDEZ, José E.; VARGAS COLORADO, Alejandro  y  PICAZO GAMA, Yasser. Maximum design seismic behavior factor for buildings located in the city of Veracruz, and designed with the MDOC-CFE-2015. Ing. sísm [online]. 2021, n.105, pp.59-83.  Epub 04-Oct-2021. ISSN 0185-092X.  https://doi.org/10.18867/ris.105.566.

This study shows that in the process of the seismic design of a building for values of the seismic behavior factor (Q) of three or four, according to the Manual of Civil Works Design of the Federal Electricity Commission (MDOC-CFE-2015, for its acronym in Spanish), it may occur that the serviceability limit state governs the strength design of a structure, which it should not be. Thus, the designer will have to go through an iterative process that could require many iterations, significantly increasing the work. Therefore, a function is obtained to estimate the maximum value of Q to design a building, whose implementation considerably reduces said iterations.

Palabras llave : Seismic behaviour factor; seismic design; Civil Works Design Handbook of the CFE 2015.

        · resumen en Español     · texto en Español     · Español ( pdf )