Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Similares em SciELO
Compartilhar
Revista mexicana de física
versão impressa ISSN 0035-001X
Resumo
HERNANDEZ-GUTIERREZ, C.A. et al. The role of SnO2 high resistivity transparent layer deposited onto commercial conducting glass as front contact in superstrate configuration thin films solar cells technology: influence of the deposition technique. Rev. mex. fis. [online]. 2019, vol.65, n.5, pp.554-559. Epub 23-Abr-2020. ISSN 0035-001X. https://doi.org/10.31349/revmexfis.65.554.
The deposition of a High Resistivity Transparent oxide between a Transparent Conductive Oxide and the window Cadmium sulfide has demonstrated the improvement of performance of Cadmium sulfide/Cadmium telluride solar cells, fabricated in the superstrate-configuration. In this work the influence of the Pneumatic Spray Pyrolysis and magnetron sputtering techniques on the properties TCO/SnO2/CdS structure through the deposition of the intermediate SnO2 between the commercial conducting glass and CdS window is presented by means of X-ray Photoelectron Spectroscopy, Secondary Ion Mass Spectroscopy, and contact resistance, calculated using Transmission Line Method, in order to reduce the front contact resistance in devices with superstrate-configuration. The results of this work are applicable to other solar cells in the same configuration as the recent solar cells based on the compound Sb2Se3, where the use of this type of High Resistivity Transparent has not been studied.
Palavras-chave : 88.40.fc; 07.55.Ge; Solar cell; high resistivity transparent oxide; pneumatic spray pyrolysis; magnetron sputtering.