SciELO - Scientific Electronic Library Online

 
vol.23 número2Adaptación del proceso de producción de alginato para el alga café Sargassum horridum (Fucales: Sargassaceae)Estudio reológico de soluciones poliméricas de carboximetil celulosa índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Ingeniería, investigación y tecnología

versão On-line ISSN 2594-0732versão impressa ISSN 1405-7743

Resumo

POOL-BLANCO, Sherly Joanna; GAMBOA-MARRUFO, Mauricio; HINCZ, Krisztián  e  DOMINGUEZ-SANDOVAL, Cristian Joel. Wind tunnel tests of an inflated membrane structure. Two study cases: with and without end-walls. Ing. invest. y tecnol. [online]. 2022, vol.23, n.2, e1865.  Epub 04-Nov-2022. ISSN 2594-0732.  https://doi.org/10.22201/fi.25940732e.2022.23.2.011.

The use of textile membranes in architecture has increased rapidly in the last decades. Membrane structures are lightweight, economic structures with unique shapes. At the same time, their structural analysis is particular compared to the analysis of conventional structures. The form-finding procedure, the large displacements of the structures, and the special properties of the composite material all require unique tools. The wind analysis of membrane structures is one of the most challenging parts of the design because the design codes do not provide the pressure coefficients of the doubly curved shapes of membrane structures. The main scope of the present research was to determine the mean pressure coefficient fields over an inflated membrane structure by wind tunnel experiments. The structure, composed of six inflated circular arches, was analyzed with and without end-walls for three wind directions. The equilibrium shape of the inflated structure was determined with the Dynamic Relaxation Method. Based on the numerically determined equilibrium shape of the inflated structure, a model was made using a 3D printer. The flow around the model according to three wind directions was analyzed in an open-circuit wind tunnel. The pressures were measured in 102 external and 102 internal points of the inflated arches and 27 points on each end-wall. The experimentally determined pressure coefficient fields for different wind directions are presented and compared for the closed and open cases (with and without end-walls). The presented mean pressure coefficient fields can be used during the structural analysis of inflated structures with similar shapes and geometric (height/width, height/length, etc.) ratios. The introduced results extended with further wind tunnel experiments of similar structures with different geometric ratios can be the basis of future general regulations for the wind analysis of inflated structures.

Palavras-chave : Wind tunnel; pressure coefficient; membrane structures; inflated hangar; wind direction.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )