Serviços Personalizados
Journal
Artigo
Indicadores
Citado por SciELO
Acessos
Links relacionados
Similares em SciELO
Compartilhar
Superficies y vacío
versão impressa ISSN 1665-3521
Resumo
ASOGWA, P.U.; EZUGWU, S.C. e EZEMA, F.I.. Variation of optical and solid state properties with post deposition annealing in PVA-Capped MnO2 thin films. Superf. vacío [online]. 2010, vol.23, n.1, pp.18-22. ISSN 1665-3521.
MnO2 thin films were synthesized on glass substrate by chemical bath deposition technique within the pores of polyvinyl alcohol (PVA) at room temperature. The chemical bath for the deposition of MnO2 is made up of solution of MnCl4, NH4Cl, NH3, and PVA solution. The deposited films were annealed in air at 473K and 673K and characterized for the structural, morphological and optical properties. These properties were studied by means of X-ray diffraction (XRD), optical microscopy and optical spectrophotometer for their potential application in solar energy devices. From the absorption spectra, the calculated direct and indirect band gap energies lie respectively in the range of 1.8 - 2.5 eV and 0.8 and 1.2 eV. The films show good transmittance in the near infrared region of the solar spectrum. Post deposition annealing affects both the optical and solid state properties of the films.
Palavras-chave : Chemical bulk deposition; Transparent semiconductor; Oxides thin films.
![](/img/en/iconPDFDocument.gif)