SciELO - Scientific Electronic Library Online

 
vol.11 número3Dynamic Self-Assessment of Supply Chains Performance: an Emerging Market ApproachComputing the Euler Number of a Binary Image Based on a Vertex Codification índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Journal of applied research and technology

versão On-line ISSN 2448-6736versão impressa ISSN 1665-6423

Resumo

VAZQUEZ, J.A.  e  VELASCO-VILLA, M.. Experimental Estimation of Slipping in the Supporting Point of a Biped Robot. J. appl. res. technol [online]. 2013, vol.11, n.3, pp.348-359. ISSN 2448-6736.

When developing a gait cycle on a low-friction surface, a biped robot eventually tends to slip. In general, it is common to overcome this problem by means of either slow movements or physical adaptations of the robot at the contact point with the walking surface in order to increase the frictional characteristics. In the case of slipping, several types of sensors have been used to identify the relative displacement at the contact point of the supporting leg with the walking surface for control purposes. This work is focused on the experimental implementation of a low-cost force sensor as a measurement system of the slipping phenomenon. It is shown how, supported on a suitable change of coordinates, the force measurement at the contact point is used to obtain the total displacement at the supporting point due to the low-friction conditions. This is an important issue when an accurate Cartesian task is required.

Palavras-chave : biped robot; slipping; walking cycle.

        · resumo em Espanhol     · texto em Inglês

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons