Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Similares em SciELO
Compartilhar
Journal of applied research and technology
versão On-line ISSN 2448-6736versão impressa ISSN 1665-6423
Resumo
TAVOOSI, V.; KAZEMI, R. e HOSSEINI, S. M.. Vehicle Handling Improvement with Steer-by-Wire System Using Hardware in the Loop Method. J. appl. res. technol [online]. 2014, vol.12, n.4, pp.769-781. ISSN 2448-6736.
In this paper, a control algorithm for improving vehicle handling has been proposed by applying correction angle to the steered wheel, based on the optimal and adaptive theory using Simulink MATLAB software. A 4DOF model with nonlinear tire and SBW subsystem is presented using hardware in the loop method. Since some space variables cannot be measured, an estimator is used to extract the measurable variables from the simulated model and convert them to the required variables of the controller. These variables are transmitted to the controller and then it adopts itself with new conditions and applies the best modification on the steering. The results reveal that the proposed controller can significantly improve vehicle handling during severe maneuvers.
Palavras-chave : Handling; vehicle; steer-by-wire; controller; hardware in the loop method.