Resumo

ITURBE-GARCIA, José Luis; GARCIA-NUNEZ, Manolo Rodrigo  e  LOPEZ-MUNO, Beatriz Eugenia. Synthesis of the Mg₂Ni Alloy Prepared by Mechanical Alloying Using a High Energy Ball Mill. J. Mex. Chem. Soc [online]. 2010, vol.54, n.1, pp.46-50. ISSN 1870-249X.

Mg₂Ni was synthesized by a solid state reaction from the constituent elemental powder mixtures via mechanical alloying. The mixture was ball milled for 10 h at room temperature in an argon atmosphere. The high energy ball mill used here was fabricated at ININ. A hardened steel vial and three steel balls of 12.7 mm in diameter were used for milling. The ball to powder weight ratio was 10:1. A small amount of powder was removed at regular intervals to monitor the structural changes. All the steps were performed in a little lucite glove box under argon gas, this glove box was also constructed in our Institute. The structural evolution during milling was characterized by X-ray diffraction and scanning electron microscopy techniques. The hydrogen reaction was carried out in a micro-reactor under controlled conditions of pressure and temperature. The hydrogen storage properties of mechanically milled powders were evaluated by using a TGA system. Although homogeneous refining and alloying take place efficiently by repeated forging, the process time can be reduced to one fiftieth of the time necessary for conventional mechanical milling and attrition.

Palavras-chave : Mechanical Alloying; Mg₂Ni alloy; Hydrogen Storage; X Ray Diffraction; Scanning Electron Microscopy.