SciELO - Scientific Electronic Library Online

 
vol.63 número1New insight into water-obsidian interactionStructural refinement, photoluminescence and Raman spectroscopy of Wurtzite Mn-doped ZnO pellets índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista mexicana de física

versión impresa ISSN 0035-001X

Rev. mex. fis. vol.63 no.1 México ene./feb. 2017

 

Research

Geometry of classical particles on curved surfaces

J.A. Santiagoa  * 

G. Chacón-Acostaa 

O. González-Gaxiolaa 

G. Torres-Vargasb 

aDepartamento de Matemáticas Aplicadas y Sistemas, Universidad Autónoma Metropolitana Cuajimalpa, Vasco de Quiroga 4871, 05348 Cd. de México, e-mail: gchacon@correo.cua.uam.mx; ogonzalez@correo.cua.uam.mx

bPosgrado en Ciencias Naturales e Ingeniería Universidad Autónoma Metropolitana, Cuajimalpa Vasco de Quiroga 4871, 05384 Cd. de México, e-mail: gamaliel.tv@gmail.com


Abstract

In this paper we consider a particle moving on a curved surface. From a variational principle, we write the equation of motion and the constraining force, both in terms of the Darboux frame adapted to the trajectory, that involves geometric information of the surface. By deformation of the trajectory on the surface, the constraining force and equation of motion of the perturbation are obtained. We show that the transversal deformation follows a generalized Raychaudhuri equation that contains extrinsic information besides the geodesic curvature. Results in the case of surface with axial symmetry can be parametrized in terms of the angular momenta.

Keywords: Curves; curved surfaces; particle on surfaces

Resumen

En este artículo consideramos el movimiento de una partícula sobre una superficie curvada. De un principio variacional, encontramos las ecuaciones de movimiento y la fuerza de constricción, en el marco de Darboux adaptado a la trayectoria. Deformando estas ecuaciones, encontramos que la perturbación transversal satisface una ecuación de Raychaudhuri generalizada que contiene información extrínseca además de la curvatura geodésica. En el caso de superficies con simetría axial, los resultados se pueden parametrizar en términos del momento angular.

Palabras clave: Curvas; superficies curvas; partículas en superficies

PACS: 02.40.Hw; 02.40.-k; 45.20.-d

1. Introduction

Recently the physics of particles and fields in curved surfaces in Euclidean space has become subject of interest, because many phenomena are reduced to one of them. For example, it is known that a liquid crystal on curved surfaces, look for smectic phases as parallel curved surface1. We also know, that some electronic properties of certain two-dimensional materials, are explained modeling particles, living in the surface, satisfying the Schrödinger or the Dirac equation2. Topological defects on surfaces3, relativistic particle dynamics4, and diffusion on surfaces5 are also some examples of how the interaction of particles and fields with surfaces through geometry, can be used to model several natural phenomena. Although from a mathematical point of view, variational problems related to curves and surfaces, has been addressed6, they have recently attracted attention, because has been possible to interpret the Euler-Lagrange equations in physical terms, as a balance of internal forces and moments, see e.g.7 and8.

Inspired by a recent formalism developed to investigate properties of elastic curves constrained on surfaces9, in this work we obtain the basic, but generic, geometric elements of particles constrained on surfaces. Although it is well known the classical physics of particles, usually specific cases of particles moving on surfaces are solved. Here we present its description in terms of the geometric information of the surface, either intrinsic through the gaussian curvature or extrinsic information, encapsulated in the second fundamental form.

We obtain, aside to the equations of motion, the constraining force on the particle. The corresponding equations of small perturbations are also obtained, showing that they includes, even with no external forces, extrinsic information. Some general results if the surface has axial symmetry and the gravitational field taken into account are showed.

2. Lagrangian Classical Mechanics

Let us consider the action of a free particle, constrained on a surface through the vector Lagrange multiplier λ,

L(x,λ,ξa)=m2x˙2(t)dt+λ(x(t)-X(ξa))dt. (1)

Here x(t)=(x1(t),x2(t),x3(t))R3, the dot stands for the derivative with respect to the time t, and m is the particle’s mass. The equation of the surface, parametrized by local coordinates ξa, a={1, 2}, can be written as x=X(ξa). By taking infinitesimal deformations xx+δx we have

δL=mδx˙x˙dt+λδxdt. (2)

After integration by parts in the first term, the corresponding Euler-Lagrange equations are given by

mx¨=λ. (3)

Moreover, variation respect to the local variables, ξaξa+δξa, gives

δL=-λeaδξadt, (4)

where ea=aX, are tangent vectors to the surface. Therefore, the Lagrange multiplier λ=-λn, being n=e1×e2/||||, the unit normal to the surface. Finally, under deformation of the Lagrange multiplier, δλ, we have that

δL=δλ(x(t)-X(ξa))dt,

and the equation for the constraint is obtained.

However, the Eq. (3), in not useful in this form. Instead, we write it in the Darboux frame {T,n,l=T×n}, where T is the unit tangent to the curve and l is orthogonal to the curve on the surface, see Fig. (1). This basis satisfies that T'=κnn+κgl, n'=-κnT+τgl, l'=-κgT-τgn, where prime stands for the derivative respect to arc length s10. These equations defines de normal curvature κn=T'n, the geodesic curvature κg=T'l in addition to the geodesic torsion τg=n'l.

Figure 1. The Darboux frame. 

We also consider that the constraint does not depend on time, then the velocity of the particle is given by

x˙=eatav(t),=Tv(t), (5)

where v(t)=ds/dt, ta=dξa/ds and s the arc length along the trajectory of the particle. The relation of time t, with the arc length of the curve is given by ds2=gab(dξa/dt)(dξb/dt)dt2, that involves the induced metric on the surface, gab=eaeb. Then we can write v2(t)=gab(dξa/dt)(dξb/dt). In addition, using Eqs. (5) and (3), we see that x˙x¨=0, and therefore the conservation of the energy, mv2(t)/2=E, follows.

The second derivative can be obtained from

x¨=T˙v(t)+Tv˙(t). (6)

In the first term we can get

T˙=v(t)dTds,=v(t)-Kabtatbn+(d2ξcds2+Γabctatb)ec,=v(t)(κnn+κgl), (7)

in the second line, the second fundamental form of the surface Kab=-aebn, has been introduced, and the Christoffel symbols Γbca compatible with gab also appear; there is no projection along T, since it is a unit vector. Notice that we can identify κn=-Kabtatb and κgl=κgcec. Thus, we can write Eq. (3) in the form

mv2(t)(κnn+κgl)+ma(t)T=-λn (8)

where a(t)=dv/dt. Therefore, we can read that the particle moves along a geodesic path, κg=0, with a(t)=0, i.e. v(t)=v0, and feels a force, along the normal to the surface given by

λ=-mv02κn,=mv02Kabtatb. (9)

We can write this force in terms of the principal curvatures κi, of the surface

λ=mv02κ1cos2θ+κ2sin2θ, (10)

where, as usual, θ is the angle between T and the principal vector v 1.

If there is an external force F, acting on the particle, we can decompose the equation of motion in the local basis and we can write

mx¨=F+λ,=(-λ+Fn)n+FTT+Fll, (11)

such that, the corresponding equations to solve are then given by

mv2(t)κg=Fl,ma(t)=FT,λ=Fn-mv2(t)κn (12)

and the energy is conserved, mv2(t)/2+U=E, with U the corresponding potential relative to the external force field. Notice that if we use the first and the third equations, then

λ=Fn-Flκnκg, (13)

i.e. the force λ is written in terms of geometric information of the surface and of course, in general, it depends on time t. Therefore, a condition such that no constraining force exists is given by Fn=mv2κn, or

κnFl=κgFn. (14)

This is a remarkable expression, which tell us that, in order that the constraining force vanishes, the ratio of non-tangential components of the external field must be equal to the ratio of the curvatures of the surface.

2.1 Perturbative expansion

To first order the Newton law (3) is given by (if the external force is a constant, e.g the gravitational field)

mδx¨=δλ, (15)

where the deformations are along the surface,

δx=ΦT+Ψl. (16)

Then, since the energy is conserved, we see that mx˙δx˙+Uδx=0. Derivative respect to the time is given by

δx˙=(Φ˙-vΨκg)T+v(Φκn-Ψτg)n+(Ψ˙+Φvκg)l. (17)

Thus we have that x˙δx˙=v(Φ˙-vΨκg), and therefore

mv(Φ˙-vκgΨ)=-ΦTU-ΨlU,=(ΦFT+ΨFl). (18)

If there is no external potential then Φ̇-vκgΨ=0, follows. Along geodesic trajectories we have that

mvΦ̇=0. (19)

Therefore, with no external forces the tangential deformation of geodesics is a rigid translation, Φ=C, or is only a reparametrization of the path if FT0. Thus, the only physical deformations is along the transversal direction l, in Eq. (16), as we already know from invariance of the action under reparameterizations.

In order to obtain δx¨, we notice that it is not just (d/dt)δx˙, but we have to take into account the Riemann curvature of the surface Rabcd, so we get

d(δx˙)dt=δx¨+R(vT,ΦT+Ψl)x˙,=δx¨+v2R(T,ΦT+Ψl)T,=δx¨+Φv2R(T,T)T+Ψv2R(T,l)T. (20)

When projected into the tangent direction, the second term of the last equation is identically zero, as a consequence of the antisymmetry of the Riemann tensor. From Eq. (17) and (20), we can find

δx¨=[Φ¨-2vκgΨ˙-v2(κg2+κn2)Φ+(v2τgκn-a(t)κg-vκ˙g)Ψ]T+[Ψ¨+2vκgΦ˙-v2(κg2+τg2)Ψ+(v2τgκn+a(t)κg+vκ˙g)Φ-v2RablalbΨ]l+[2vκnΦ˙-2vτgΨ˙-(v2τgκg-a(t)κn-vκ˙n)Φ-(v2κnκg+a(t)τg+vτg˙)Ψ]n. (21)

Since on two dimensional surfaces Rab=gabR/2, we can rewrite Rablalb=R/2, in the second line of Eq. (21). On the other hand, considering that the constraint λea=0, remains under deformations, i.e. δ(λea)=0, we have that

δλ=-δλn+δλ, (22)

where

δλ=-λ(-κnΦ+τgΨ)T-λ(τgΦ+KablalbΨ)l. (23)

Therefore to first order, the Newton law (3) implies that the constraining force along the perturbed path is given by

δλ=2mvτgΨ˙+(τgFl-mvκ˙n-3κnFT)Φ+(τgFT+mvτg˙-3κnFl)Ψ. (24)

Whereas the transversal projection implies that

mΨ¨+(4κgFl-mv2(κg2+τg2+R/2)+λKablalb)Ψ=-(3κgFT+mv2τgκn+mvκ˙g+λτg)Φ. (25)

We see that it involves not only the transversal deformation Ψ, but also the longitudinal one Φ, that satisfies (18). In these equations, we can write the first and the second derivatives, of the field Ψ, in terms of the local coordinates as

Ψ̇=vtaΨa, (26)

and

Ψ̈=v2(κgΨala+tatbbΨa)+a(t)taΨa, (27)

where we have defined Ψa=aΨ. In a later work, we will discuss specific solutions to these equations.

2. 2. Geodesic trajectories

On perturbed geodesic curves, the deformation on the constraining force, is given by

δλ=2mvτgΨ̇+mvτ̇gΨ. (28)

Without external forces it simplifies such that δλ=mv(2τgΨ̇+τ̇gΨ). The transversal perturbation satisfies the Raychadhury-like equation12

mΨ¨-(mv2(τg2+R/2)+(mv2κn-Fn)Kablalb)Ψ=0. (29)

Besides intrinsic information, projections of the second fundamental form appear in this equation. Even without external forces, extrinsic information are required,

Ψ¨-(v2(τg2+R/2)+v2κnKablalb)Ψ=0. (30)

A simple example is given by a particle falling on the unit sphere, starting from rest at the north pole, under the gravitational field. Since Fl=0 then, according to the first equation in Eq. (12), we have κg=0, and therefore the trajectory is a great circle. For a sphere of radius r it is known that Kab=gab/r, such that for a unit sphere we have Kab=gab and hence κn=-1, τg=0. Moreover, since R=K2-KabKab in this case R=2, and from the energy conservation we have v2=2g(1-cosθ), where θ is the angle between the normal vector n and the axis z. Due to the geodesic torsion vanishes we get δλ=0. On the normal direction, Fn=-mgcosθ, and then the transversal deformation follows the equation Ψ̈-gcosθΨ=0. In terms of the angle θ,

v2θ'2θΨθ+gθ'sinθΨθ-gcosθΨ=0. (31)

Nevertheless, we note that a first integral is, Ψ̇2/2-gcosθΨ2=C, and therefore

2g(1-cosθ)θ'2Ψθ2-2gcosθΨ2=C. (32)

2.2.1 Axisymmetric surfaces

If the surface has axial symmetry, we can parametrize it in the form

X(φ,l)=(ρ(l)cosφ,ρ(l)sinφ,z(l)). (33)

The infinitesimal element of distance is given by ds2=ρ2dφ2+(ρ'2+z'2)dl2, here prime indicates derivative respect to l. The tangent vectors e a are

eφ=(-ρsinφ,ρcosφ,0),el=(ρ'cosφ,ρ'sinφ,z'). (34)

The unit normal is then

n=1ρ'2+z'2(z'cosφ,z'sinφ,-ρ'). (35)

The second fundamental form K ab has components,

Kφφ=ρz'ρ'2+z'2

and

Kll=ρ'z-ρz'ρ'2+z'2.

The principal curvatures are found to be

Kφφ=z'ρρ'2+z'2

and

Kll=Kllρ'2+z'2.

With these basic elements we can describe a particle restricted to lie along this surface. Because the symmetry under rotations about the z axis, Mz=Mk is conserved where M=mx × x˙, is the angular momenta and x˙=eφφ˙+ell˙. We find

Mz=mρ2φ̇. (36)

The normal curvature along the trajectory is given by

-κn=Kφφdφds2+Klldlds2. (37)

This equation can be written in terms of M z . In the first term we can use Eq. (36), in the second one we can use the induced metric on the surface, to obtain a first integral of κg=0, in the form

12dlds2+Ueff=0, (38)

where

Ueff(Mz,l)=-12(ρ'2+z'2)1-Mz2m2v2ρ2. (39)

Then we can write the normal curvature of geodesics

-κn=Mz2m2v2z'ρ'2+z'21ρ3+ρ'z-ρz'(ρ'2+z'2)3/2(1-Mz2m2v2ρ2), (40)

and therefore, the force λ in Eq. (9), is completely determined. If the gravitational field F=-mgk is taken into account, we can see that

Fn=mgρ'ρ'2+z'2,Fl=mgz'ρρ'2+z'2dφds. (41)

The velocity v(t), is determined by conservation of the energy

v2(t)=2mE-mgz(l(t)). (42)

An example is the catenoid, a minimal surface that we can parametrize through

X(φ,l)=(coshlcosφ,coshlsinφ,l), (43)

where l(-,), φ 0, 2π. The normal curvature of geodesic curves is parametrized by M z

-κn=sech2l(2Mz2sech2lm2v2-1). (44)

The curvature R=-2sech4l, and the second fundamental form has components Kφφ=1, and Kll=-1. If a particle moves on this surface under the gravitational field, then the projections of the force are Fn=mgtanhl, and Fl=gMz/vcosh2l. Because the symmetry, geodesics can be classified according the angular momentum Mz, see Fig. (2): If 0<Mz<1, geodesic crosses parallels along the catenoid; for Mz>1, the path is on one side of the catenoid; the equator corresponds to Mz=1 and Mz=0 is a meridian11.

Figure 2. The several geodesic curves on the catenoid, classified according the angular momenta. 

An easy example is a particle falling along a meridian starting at l 0, and v2=2g(l0-l). The constraining force λ is found to be

λ(l)=mg(tanhl-2(l0-l)sech2l). (45)

If the particle leaves the catenoid at l s , then λ(ls)=0, implies that tanhls=2(l0-ls)sech2ls. If for instance l0=1, then ls0.61.

Being φ=const, for this path tφ=0 and tl=sechl. From the definition of l, we note that la=gϵabtb. We have ll=0 and lφ=sechl. Therefore the equation of the transversal deformation is given by

Ψ¨+gsech2ltanhlΨ=0. (46)

2.2.2 Particle on a surface in a curved space

If the particle moves onto a surface embedded into a curved space, with coordinates xμ and metric gμν(xα), we have the constrained functional as

L(xμ,ξa,λ)=m2v2dt+λμ(xμ(t)-Xμ(ξa))dt. (47)

The first term involves the background metric, v2=gμν(x)ẋμẋν, the second one the Lagrange multipliers λμ. It generalizes equation (1) to curved background. Under deformations δx we obtain as before, equation (3), but now in the form

md2xμdt2+Γναμdxνdtdxαdt=-λnμ, (48)

where the Christoffel symbols compatible with gμν appear. The projection on the Darboux frame follows the same lines as before. We then have

mv2(t)(κnnμ+κglμ+ΓναμTνTα)+ma(t)Tμ=-λnμ, (49)

where T=Tμeμ, is the tangent vector field, and eμ=μX, the tangent vectors to the surface. If the particle moves freely we have, as before, that it follows a geodesic curve along the surface, with a(t) = 0. The force λ is given by

λ=-mv2κn. (50)

In this case the second fundamental form Kab is defined through the covariant derivative Dμ, compatible with gμν: Da=eaμDμ, i.e. Kab=-g(Daeb,n). In addition we can see that the projection of the Christoffel symbols along the tangent vector is null

ΓαβνTαTβ=0. (51)

It is certainly interesting to know the effect of nontrivial background, that we will present in future work.

3. Summary and conclusions

In this paper we have presented the geometric elements in the description of particles on surfaces. Projection of the Newton second law along the normal to surface, gives the constraining force, that involves the normal curvature of the surface. Geodesic curvature (times v 2) gives the acceleration in the transversal direction to the movement. Classical perturbations of the path is equivalent to a field theory on curved surfaces. We show that from conservation of energy, a first order equation of the tangential deformation, is obtained. We also show that the equation of the transversal perturbation follows a Raychaudhuri-like equation that includes extrinsic information even if there is not external forces. If the particle moves onto a surface with axial symmetry, the results are parametrized in terms of the conserved projection of the angular momenta. The particular results in the case of geodesic curves are obtained. Using the formalism here presented, a problem to be addressed, is related to the motion of extended objects on surfaces, for elastic curves, the model must include the bending energy, quadratic in the curvature which has been extensively examined13.

Acknowledgments

JAS wishes to acknowledge J Guven, the many fruitful discussions on geometry. GTV aknowledges CONACyT for a scholar fellowship.

References

1. R.D. Kamien, R.N. Nelson, C.D. Santangelo and V. Vitelli, Phys. Rev E 80 (2009) 051703. [ Links ]

2. A.K. Geim and K.S. Novoselov, Nature Materials 6 (2007) 183. [ Links ]

3. A.M. Turner, V. Vitelli and D.R. Nelson, Rev. Mod. Phys. 82 (2010) 1301. [ Links ]

4. A. Amador, N. Bagatella, R. Cordero and E. Rojas, J. Phys. A: Math. Theor. 41 (2008) 115401. [ Links ]

5. P. Castro-Villarreal, J. Stat. Mech. (2010) P08006. [ Links ]

6. J. Langer and D.A. Singer, J. Diff. Geo. 20 (1984) 1. [ Links ]

7. E.L. Starostin and G.M.H van der Heiden, Phys. Rev. E 79 (2009) 066602. [ Links ]

8. R. Capovilla and J. Guven, J. Phys. A: Math. and Gen. 35 (2002) 6233. [ Links ]

9. J. Guven and P. Vázquez-Montejo, Phys. Rev. E 85 (2012) 026603. [ Links ]

10. M. do Carmo, Differential Geometry of Curves and Surfaces, (Prentice-Hall, Englewood Cliffs, 1976 ). [ Links ]

11. J.A. Santiago, G. Chacón-Acosta and O. González-Gaxiola, Journal of Physics: Conference Series 545 (2014) 012014. [ Links ]

12. S. Kar and S. Sengupta, Pramana - J. Phys. 69 (2007) 49. [ Links ]

13. J. Guven, J.A. Santiago and P. Vázquez-Montejo, J. Phys. A: Math. Theor. 46 (2013) 135201. [ Links ]

Received: February 26, 2016; Accepted: October 14, 2016

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License