nueva página del texto (beta)
Inglés (pdf)
Artículo en XML
Referencias del artículo
Traducción automática
Enviar artículo por email
Citado por SciELO 
Similares en
SciELO 
Permalink
Introduction
Seed oils are important source of bioactive natural compounds, applicable in food and cosmetic industries. Certain oils with specific physicochemical properties are consumed without much processing. Obviously, physicochemical parameters of seed oils are important in the determination of edibility and other industrial applications. For instance, seed oil with high acid value is usually not edible, because the high acidity is attributed to extensive hydrolysis of the oil by lipolytic and oxidizing enzymes [1]. High acid value is also attributed to the induction of the toxicity of oils [2]. Physicochemical characteristics that favours the use of an oil for cooking and other culinary uses include low acid value, low peroxide value, presence of anti-oxidant compounds and low free fatty acids [3]. These properties determine the overall quality of the oil such as the shell life, wholeness and extent of adulteration. Physicochemical characteristics which makes an oil suitable for industrial applications as in soap production and other cosmetic applications are high acid value and high saponification value. Oils with such physicochemical parameters are usually of low nutritional and food relevance to man.
Microbial infections have become a serious threat to human health worldwide because of the emergence of multi-drug resistant (MDR) microbial strains [4]. Resistance to the existing drugs[5] have led to the search for the new, safe and renewable alternatives [6, 7]. Some seed oils are renowned for their antimicrobial properties. Several in vitro studies confirms the effect of seed oils with their major bioactive compounds on pathogenic microbes [8-10]. In recent times, there has been renewed interest on seed oils as sources of novel antimicrobial and antioxidant compounds [11]. The seeds of plant usually contain lipids, fatty acids, amines, proteins and esters which when converted to useful products such as in cosmetics, may be applied for the maintenance, nurturing and rejuvenation of the human skins and hair for improved appearances. In the tropics, many valuable seeds that are oil-rich are allowed to perish each year without anyone paying important attention to them [12]. If the natural resources are properly harnessed and put into good utilisation as in making cosmetic products, it would not only improve individual economic status, but also improve economic situation as the waste are converted to wealth.
The adoption of green principle in the production of cosmetic soaps is certainly an encouraged development. Besides the fact that the green process would free the environment of daily introduction of hazardous chemicals, it would also reduce the effects of pollution, endocrine disruption and other associated diseases in the environment [13]. In addition, the heavy dependence on synthetic chemicals for soap production would drastically reduce if progress is made on improving the source of raw material for soap making [14]. The benefits of a cheap and easily available alkali sources for a cash-strapped developing nation are immense [13]. Efficient designs in the unit operations of the soap making process, as well as in saponification reaction stage, to bring about reasonable substitution of locally derived potassium hydroxide alkali, for imported ones are seriously encouraged [15].
The trees of Prosopis africana, of the family “fabaceae”, is common in the middle belt zone and Northern parts of Nigeria. It is locally referred to as “kiriya” and “okpehe” in Hausa and Idoma/Tiv languages in Nigeria respectively[16]. Almost all parts of the tree are of important medicinal values; the leaves are used for headache and toothaches as well as other various ailments, the combination of the leaves and bark are used in the treatment of rheumatism, while the bark alone is used as remedies for skin diseases, fever and some eye problems. The roots are a diuretic and are used to treat gonorrhea, tooth and stomach aches, dysentery and bronchitis [17]. Fatty acids and a group of pentacyclic triterpenes were identified as the bioactive responsible for the antibacterial activities. Perilla seed oil [18], poppyseed oil [19], taramira oil [20, 21], tigernut oil [9, 10], have all been shown to be medicinally active across different spectrum of pathogenic microorganisms. There is dearth of information on the chemical composition, physicochemical analysis and antimicrobial activities of the seed oil and soap of Prosopis africana. The Physicochemical activities, fatty acids profile, antimicrobial activities and corresponding cosmetic saponification potential of Prosopis africana seed oil are evaluated and reported for the first time. This study aimed at adopting the principle of green chemistry on underutilized tropical seed to producing antiseptic soaps, free of all synthetic alkali, anti-microbial agents, colourants, fragrance and preservatives but with potential to improve natural beauty, attractiveness and appearance of skin and hair.
Experimental procedure
Plant materials. The seed of Prosopis africana were collected within Ilorin metropolis, Nigeria. The plant materials were identified at the Herbarium of the Department of Plant Biology, University of Ilorin, Ilorin, Nigeria and voucher specimen numbers UILH/002/472 was obtained. The seeds was dried at ambient temperature, de-shelled, pulverised and kept briefly in a cool dark place for further work.
Solvents and reagents. All reagents and solvents used were analytical grade and where necessary, solvents were re-distilled before use.
Extraction of seed oils. The pulverized P. africana seed (300 g) was subjected to soxhlet extraction using n-hexane at 60 °C for approximately 3 h. The extract was concentrated via distillation using rotary evaporator.
Physicochemical characterisation of the oils. The physicochemical parameters of the oil were determined using standard procedures with slight modifications where applicable. Odour, colour, and physical state were determined by sensory evaluation [22-24].
Determination of saponification value.
One g of the oil was weighed into a conical flask and 25 mL 0.5 N KOH was added using a pipette. The mixture was warmed in a waterbath for 5 minutes and 3 drops of phenolphthalein indicator was added to it while still warm and then titrated against 0.5 N HCl until the pink colour disappeared. The discolouration indicates the end point. A blank (containing no oil) was subjected to the same treatment and results were expressed as mg KOHg-1.
Saponification value was then calculated using the equation:
Where B= blank titre value; S= sample titre value; molecular weight of KOH was taken to be 56.1 g/mol, M=molarity of HCl
Determination of iodine value
0.2 g of the oil were weighed into 500 mL conical flask and the oil was dissolved with 15 mL of dichloromethane. 25 mL Wiji’s solution was added and the flask was stoppered and shakened. The resulting mixture was allowed to stand in the dark for two hours. The flask was removed and 20 mL of 10 % potassium iodide (KI) solution was added followed by an addition of 150 mL distilled water. The liberated iodine was then titrated with 0.1 M sodium thiosulphate (Na2S2O3) shaking it constantly and vigorously until the blue-black color had almost disappearred using starch as indicator. A blank (containing no oil) titration was also carried out.
Results are expressed as I2 100 g-1. The iodine value (I.V) was determined by the expression:
where M = Molarity of sodium thiosulphate; V1 = titre of sodium thiosulphate used in blank; V2 = titre of sodium thiosulphate used in sample
Determination of acid value
One g of the oil was weighed into a flask with 25 mL of ethanol and 3 drops of phenolphthalein indicator added. The mixture was warmed in a waterbath for 5 minutes and titrated against 0.1 N KOH until the pink colours which indicates the end point. A blank was performed alongside. The acid value was expressed as KOH g-1 and calculated as follows:
where AV= Acid value; N= normality of KOH; V1= titre for KOH used in sample; V2=titre of KOH used in the blank
Determination of free fatty acids
One g of the oil was boiled with 50 mL of ethanol and allowed to cool, 2 drops of phenolphthalein indicator was added and titrated against 0.1N KOH until pink colour was obtained. The free fatty acid was calculated using the formula:
where 56.1= molecular mass of KOH; V = Average titre value, N=normality of KOH
Determination of peroxide value
0.5 g of oil was weighed into a conical flask containing 1 g potassium iodide. The mixture of glacial acetic acid (13.5 mL) and chloroform (6.5 mL) was added to it. The conical flask was placed in a waterbath for one minute after which 20 mL 5% potassium iodide and 25 mL water was added. The whole content was titrated against sodium thiosulphate solution (0.002 M) to colourless using starch as indicator. The results were expressed in meqKg-1 as peroxide value was calculated using the formula:
where Vb = titre for blank; Vs = titre for sample
Preparation of fatty acids methyl ester (FAMEs)
One g of the seed oils was weigh into a round bottom flask and 20 mL 0.1M methanolic KOH was added. The mixtures were refluxed for 1 hour and the supernatant obtained was cooled, transferred to a separating funnel and extracted with n-hexane twice. The oil layer was concentrated in warm waterbath and the oils derived kept in a vial and refrigerated until analysed using GC-MS.
GC-MS Analysis of the FAMEs
The fatty acid composition of the trans-esterified oil was analysed using an Agilent Technology 7890A gas chromatograph GC-FID, equipped with a fused silica capillary column HP-5MS (30 by 0.32, 0.5 μm film thickness) on ultra-pure helium gas and coupled to a mass selective detector (mass spectrometer). The fatty acids profile of the FAMEs was identified by comparison of their MS spectral with data obtained from National Institute Standard and Technology (NIST, 2008) database. The relative percentages of the constituent compounds were percentages from the GC peak areas based on the total ion chromatogram (TIC).
Saponification reaction/Mixing ratio
The seed oil was saponified using hot process since the cold process produced no instant saponification. 5 mL of the oils were heated to boiling in a beaker and 50 mL of lye solution was added to the boiling oil with constant stirring. A thick semi-solid mass of saponified product was observed and then allowed to cool and set for some weeks [14, 25]. Additives which include 0.3 mg of shea butter (for skin moisturisation) and 0.4 mg of honey (for skin healing and rejuvenation) were added after the saponification to the semi-solid matter and stirred together.
Soap Characterizations
The saponified product was characterized for its pH, foaming ability, hardness, cleaning effectiveness, solubility and total alkalinity whilst comparing their values with commercial soap samples using standard procedure [26]. Commercial bathing antiseptic soaps which include Dettol and Abuad were used as standard for comparison.
Determination of pH of Soap
The pH of soap prepared was determined using a pH meter (827 pH lab model). 1 g of the soap shavings was weighed and dissolved in deionized water in a 100 mL volumetric flask. This was then made up to prepare 10% soap solution. The electrode of the pH meter was inserted into the solution and the pH was recorded as described [27].
Foaming ability test
0.2 g of the soap (shavings) was added to a 500 mL measuring cylinder containing 100 mL of deionized water. The mixture was shaken vigorously in order to generate foams. After shaking for about 2 minutes, the cylinder was allowed to stand for about 10 minutes. The height of the foam in the solution was measured and recorded thereafter [27].
Solubility tests
0.2 g of each soap was added to a 100 mL measuring cylinder containing 10 mL of distilled water. The duration of the dissolution of the soap after continuous shaking was recorded.
Alkalinity test
The total alkali left after saponification reaction was determined by titration with HCl. 1 g of the soap and that of the commercial soaps used as standards were separately dissolved in 100 mL deionized water and 25 mL of each soap solution was then titrated against 0.5M HCl in triplicates. The volume of acid used was recorded and the total alkalinity calculated using the formula:
Test for cleaning effectiveness
A drop of oil was placed on four separate sheets of filter paper. The filter papers with the oil spot were immersed in a separate test tubes containing soap solution (2 g soap shavings/100 mL) each was vigorously shaking for 2 minutes. The filter papers were removed and rinsed with distilled water and the degree of cleanliness in each filter paper observed.
Determination of oils and soap antimicrobial sensitivity
The antimicrobial sensitivity of P. africana oil and the produced soap with other commercial soaps used as standard were examined using selected clinical isolates of bacteria: Streptococcus aureus, Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa, Salmonella typhi, Klebsiella pneumoniae and fungus: Candida albicans, Pehicillium notatum, Phijoptius stoloniter and Aspergillus niger. 500 mg of the oil was weighed and dissolved in 1 ml of tween-20 to get concentrations of 500 mg/mL. Serial dilution to obtain concentrations 1, 0.5, 0.25, 0.125, and 0.0625 mg/mL were made. An overnight culture of each organism was made by taken each organism from stock and inoculate into a sterile nutrient broth of 5 mL each for 18-24 hrs at 37 oC for bacterial. Pour plate method was used for the bacteria while surface plate methods was used for the fungi. Using a sterile cork borer of 8 mm, the wells were made according to the number of graded concentrations of the sample. All samples were treated in duplicates. The plates were allowed to stay on the bench for 2 hrs to allow pre-diffusion. The plates were incubated uprightly in the incubator for 18-24 hours at 37 oC for bacterial and 48 hrs at 26-28 oC for antifungal. The zone of inhibition was measure using a ruler.
Results and discussion
Physicochemical Analysis of the Seed Oil
The seed had an oil yield of 4.98%. The P. africana oil was light golden yellow in color, liquid at room temperature with palatable flavor. The physicochemical parameters of the oil (Table 1) indicated an acid value 16.96 ± 0.57 mgKOH/g which is above the value (4 mgKOH/g) recommended for edible oil by WHO/FAO. The value indicated that the oil would be applicable for non-edible purposes as in soap-making. The low peroxide value, 6.81±0.44 meqKg-1, could be as a result of the presence of phytochemicals that acts as natural antioxidants. The oil has a low percentage (14.60 ± 0.45) of free fatty acid which is indicative of the freshness of the oil. The oil has a moderate saponification value (11.6 ± 0.54 mgKOH/g) and high iodine value (145.47 ± 0.66). The high iodine value which indicates the degree of unsaturation reveals that the oil is highly unsaturated. This was further confirmed by the GC-MS analysis (Table 2) which shows a total unsaturation of 65.69% for the oil. The high degree of unsaturation of the oil partly confirmed the physical state of the oil as liquid at ambient temperature.
Table 1 Physicochemical Analysis of the Seed Oil
| Parameter | Prosopis africana | WHO/FAO (Edible Oil) |
|---|---|---|
| % Yield | 4.98 | NS |
| Saponification value (mg KOH/g) | 11.6±0.54 | 181.4±2.60 |
| Acid value (mg KOH/g) | 16.96±0.57 | 4 |
| % Free fatty acid | 14.60±0.45 | 5.78-7.28 |
| Peroxide value (meq Kg-1) | 6.18±0.04 | 10 |
| Iodine value (I2 100 g-1 of oil) | 145.47±0.66 | 80-108 |
| Colour | Yellow | NS |
| Physical state at ambient temperature (25 0C) | Liquid | NS |
- values are average of triplicates determinations; NS - None Specified
Table 2 Fatty Acids Composition of the Oils
| Peak no. | Retention Time (min) | Fatty acids | Saturation | % Composition |
|---|---|---|---|---|
| 1 | 12.55 | Valeric acid | 5:0 | 1.96 |
| 2 | 13.32 | Palmitic acid | 16:0 | 24.97 |
| 3 | 13.81 | Linoleic acid | 18:2 | 31.92 |
| 4 | 13.93 | Oleic acid | 18:1 | 33.67 |
| 5 | 14.13 | Stearic acid | 18:0 | 7.38 |
| Total Saturate | 34.31 | |||
| Monounsaturate | 33.67 | |||
| Polyunsaturate | 31.92 | |||
| Total Unsaturate | 65.69 |
- RT indicates retention time on the column in minutes.
Fatty Acids Composition of Extracted Oils
The fatty composition of the seed oil is shown in Table 2. Oleic acid (33.67%) a monounsaturated fatty acid is the most prominent fatty acid in the oil, followed linoleic acid (18:2), an unsaturated fatty acid making up 31.92% of the total oil yield. Palmitic acid, a saturated fatty acid accounts for 24.96% of the oil.. Stearic acid and valeric acid makes up (7.3%) and (1.96%) respectively in the oil.
Antimicrobial Activity of the Oil
Table 3 shows growth inhibition of the test organisms against the seed oil. Inhibition was observed at concentration ranging from 31.25 to 500 mg/L. The MIC values ranges from 31.25 to 125 mg/L against all the test organisms. Appreciable antibacterial activities were recorded against S. typhi (19.0 ± 1.41), E. coli (19.0 ± 1.41) mm and (17.0 ± 1.41) mm against S. aureus. The oil shows improved fungal inhibitory effect for both C. albicans and R. stoloniter with (15.0 ± 1.41) mm diameter zone of inhibition. Erythromycin (positive control) shows an average antibacterial zone of inhibition of (40 ± 1.41) mm while fluconazole had an average antifungal effects of (30 ± 1.41) mm at concentrations of 0.25 mg/mL. The antimicrobial result is comparable with the work of Kolapo et al., (2009) [28], who reported similar activities for ethanolic and aqueous extracts of the plant.
Table 3 Inhibitory effect of Prosopis africana Seed Oil against pathogens.
| Pathogens | Concentrations (mg/mL) | ||||||
|---|---|---|---|---|---|---|---|
| 500 | 250 | 125 | 62.5 | 31.25 | 15.63 | MIC | |
| S. aureus | 17±1.41 | 14±0.00 | 12±0.00 | 10±0.00 | - | - | 62.50 |
| B. subtilis | 16±0.00 | 14±0.00 | 12±0.00 | 10±0.00 | - | - | 62.50 |
| E. coli | 19±1.41 | 17±1.41 | 14±0.00 | 12±0.00 | 10±0.00 | - | 31.25 |
| P. aeruginosa | 13±1.41 | 10±0.00 | - | - | - | - | 250.00 |
| S. typhi | 19±1.41 | 17±1.41 | 15±1.41 | 13±1.41 | 10±0.00 | - | 31.25 |
| K. pnemonae | 13±1.41 | 10±0.00 | - | - | - | - | 250.00 |
| R. stoloniter | 15±1.41 | 13±1.41 | 10±0.00 | - | - | - | 125.00 |
| P. notatam | 13±1.41 | 10±0.00 | - | - | - | - | 250.00 |
| C. albicans | 15±1.41 | 13±1.41 | 10±0.00 | - | - | - | 125.00 |
| Niger | 16±0.00 | 14±0.00 | 12±0.00 | 10±0.00 | - | - | 62.50 |
- means no activity, values are average of duplicates samples
Mixing ratio of the oil/fat used for the saponification
The mixing ratio of oil for the saponification, colour, and washing efficiency of the soaps are shown in Table 4. The soap made from P. africana deep yellow. Honey, shear butter oil was added for rejuvenation and penetration into the skin respectively. The soap shows washing efficiency that is comparable to commercial soaps (Dettol and Abuad) used as standards.
Table 4 Mixing ratio of the oil/fat used for the saponification
| Soap Formulations | Oil/Fat and Addictive mixing ratio | Mixing ratios | Soap Colour | Washing efficiency * |
|---|---|---|---|---|
| Prosopis africana Soap | Oil+honey+shear butter | 0.95:0.025:0.025 | Deep brown | Very good |
| Dettol | - | - | White | Very good |
| Abuad | - | - | Green | Very good |
* Sensory evaluation
Physicochemical Characterization of the Prepared Soaps
The physicochemical analysis of the prepared soap as well as the commercial soaps (Dettol) used as standard are reported (Table 5). The pH value of the soap was determined immediately after caking of the soap and one month after curing (after saponification). The pH of all soap were within the acceptable range of 8.4-8.6 recommended for commercial soap and also in agreement with literature [25, 29]. Soap made from P. africana seed oil shows a foaming height and solubility comparable to the commercial soaps used as standard (Figures 2 and 3). This result indicate that high quality natural antiseptic soap could be made from Prosopis africana seed oil. The result further confirms that soaps made from natural lye has the capacity to replace existing synthetic NaOH and KOH. The use of synthetic preservatives, colourants, antimicrobial agent which may account for the non-biodegradability of the commercial soaps, hence polluting the environment, is a problem that natural antiseptic soap obtained from P. africana can remedy as all the ingredients used in its production are from natural renewable and biodegradable.
Table 5 Physicochemical characterization of the soaps
| Soap sample | Prosopis africana | Dettol | Abuad |
|---|---|---|---|
| pH before curing* | 10.05±0.07 | 9.85±0.07 | 9.65±0.07 |
| pH after curing (5 weeks)* | 8.5±0.00 | 8.50±0.07 | 8.6±0.00 |
| Foam height (cm) * | 2.50±0.42 | 2.00±0.28 | 2.60±0.28 |
| Solubility (sec) * | 393±9.60 | 786±8.20 | 668±5.4 |
| Total Alkalinity % | 0.40 | 0.40 | 0.80 |
| Texture** | Very hard | Hard | Very Hard |
* Data were obtained in triplicate
** Sensory evaluation
Antimicrobial activity of the Soaps
The antimicrobial activities of the oil (Table 6) are retained in the soap produced. The diameter zone of inhibition was dose dependent measured relative to that of the commercial soap (dettol) used as control. Highest inhibition zone of 61.8% ± 2.3 were observed for bacterial and 71.4% ± 2.3 against fungi. The result implies the produce soap is effective against both bacterial and fungi. The result adds credence to the application of P. africana seed oil and other bioactive seed oil in antiseptic soap making. The presence of natural antimicrobial agents in the seed oil makes it more applicable for management of skin infections without the need for synthetic ones. The comparable antimicrobial activities of the oil and soap of seed oil from P. africana can be attributed to synergistic action of different natural antimicrobial component which makes natural soaps better suited in fighting antimicrobial infections compare to commercial soaps whose active antimicrobial agents such as synthetic triclosan are known to induce antimicrobial resistance beside causing other biological defects like endocrine disruption [30, 31]. The antimicrobial activities of P. africana is comparable to that of dettol soap whose antiseptic agents include a broad spectrum synthetic antibiotic, chloroxylenol. Chloroxylenol is not eco-friendly as it is known to be toxic to fresh water invertebrates and fish and induce irritation and allergic reaction in human [26]. Natural antiseptic soap from the seed oil of P. africana with the inclusion of antibiotic agents of plant origin can compete favourably and replace the commercial synthetic options.
Table 6 Inhibitory effect of Prosopis africana soap against pathogens
| Pathogens | Concentrations (mg/mL) | ||||||
|---|---|---|---|---|---|---|---|
| 2.00 | 1.00 | 0.50 | 0.25 | 0.125 | 0.0625 | MIC | |
| Zone of inhibition (%) | |||||||
| S. aureus | 58.8±0.0 | 56.7±2.3 | 53.8±0.0 | 50.0±2.3 | - | - | 0.25 |
| B. subtilis | 53.1±2.3 | 46.7±0.0 | 46.2±2.3 | 47.6±0.0 | - | - | 0.25 |
| E. coli | 50.0±2.3 | 46.7±0.0 | 44.4±0.0 | 41.7±0.0 | - | - | 0.25 |
| P. aeruginosa | 50.0±2.3 | 46.7±0.0 | 46.2±0.0 | 43.4±0.0 | - | - | 0.25 |
| S. typhi | 61.8±2.3 | 56.3±0.0 | 51.7±1.4 | 50.0±2.3 | 66.7±0.0 | - | 0.125 |
| K. pnemonae | 58.8±0.0 | 58.1±0.0 | 50.0±0.0 | 48.0±0.0 | 71.4±0.0 | - | 0.125 |
| R. stoloniter | 62.5±2.3 | 60±0.0 | 55.6±0.0 | - | - | - | 0.50 |
| P. notatam | 62.5±2.3 | 65.0±2.3 | 58.8±0.0 | - | - | - | 0.50 |
| C. albicans | 70.8±2.3 | 70±2.3 | 70.6±2.3 | 71.4±2.3 | - | - | 0.25 |
| A. Niger | 60.0±2.3 | 59.1±2.3 | 55.6±0.0 | - | - | - | 0.50 |
- means no activity, values are average of duplicates samples
Conclusion
The physicochemical properties and fatty acid profile of Prosopis africana, its potential in combating skin infectious organisms when applied in specialized soap was investigated. The physicochemical analysis indicated that the oil would be very suitable for industrial purpose. The physicochemical properties, antioxidant and broad spectrum anti-microbial properties of the oil and prepared soap makes the oil highly recommended for the production of special natural antiseptic soap for skin cleansing and maintenance. The fatty acid profile further shows that the oil can be exploited as a source of polyunsaturated fatty acid as linoleic (18:2) and oleic (18:1) fatty acids. The soap made from the oil is free from every form of synthetic chemicals. This work demonstrated that soap made from natural lye has the capacity to replace existing commercial synthetic alkali, preservatives, colourants and antimicrobial agents which are known to cause environmental impedance, endocrine disruption and microbial resistance. The detail scientific data regarding the physicochemical, antimicrobial and soap potential of the seed oil of P. africana exhibited in this work would be very relevant for the development and commercialization of the underexplored seed oil into cosmetics and other allied products.
